XL-HP550 - Sharp Audio User Guide / Operation Manual. Page 29

02/8/7

XL-HP550E(E)3.fm

XL-HP550E

! To record on a tape

 
 

! Headphones

" Before plugging in or unplugging the headphones, reduce the

volume.

" Be sure your headphones have a 3.5 mm (1/8") diameter plug

and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.

" Plugging in the headphones disconnects the speakers automati-

cally. Adjust the volume using the VOLUME control.

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

! General

 

! CD player

" The clock is not on time.

" Did a power failure occur? Reset 

the clock. (Refer to page 16.)

" When a button is pressed, 

the unit does not respond.

" Set this unit to the power stand-

by mode and then turn it back on.

" If the unit still malfunctions, reset 

it. (Refer to page 31.)

" No sound is heard.

" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-

nected?

" Playback does not start.

" Is the disc loaded upside down?

" Playback stops in the mid-

dle or is not performed 
properly.

" Does the disc satisfy the stan-

dards?

" Is the disc distorted or 

scratched?

" Playback sounds are 

skipped, or stopped in the 
middle of a track.

" Is the unit located near excessive 

vibrations?

" Is the disc very dirty?
" Has condensation formed inside 

the unit?