Read Sharp XL-HP550 User Guide / Operation Manual online
02/8/7
XL-HP550E(E)3.fm
25
XL-HP550E
T
a
pe Rec
o
rding
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
Press the (TAPE ) button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.
! Recording from the radio
To interrupt recording:
Press the
Press the
button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
in step 5. Other buttons do not allow resuming.
To stop recording:
Press
Press
the
(TAPE )
button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
! Erasing recorded tapes
1
Press the TAPE button.
2
Follow steps 2 - 5 in "Recording from the radio".
1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 24.
2 Press the / ( ) button to record on side A, or the button for
2 Press the / ( ) button to record on side A, or the button for
side B.
1 Programme discs and tracks. (See page 20.)
2 Press the
2 Press the
button.
3 Press the / ( ) button to record on side A, or the button for
side B.
Erase-prevention tab of cassette tapes:
" When recording on a cassette tape,
" When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
" To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
hole with adhesive tape to record on the
tape without the tab.
Side A
Tab for
side B
side B
Tab for
side A
side A
1
Tune in to the desired station. (See page 21.)
2
Load a cassette into the cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button to choose one side or both sides.
...
To record on both sides.
...
To record on only one
side.
side.
4
Press the
button.
Recording will be paused.
5
Press the / ( ) button to record on side A, or the but-
ton for side B.
To record on both sides, begin on side A. (If recording is started
from side B, the tape will not switch over to side A.)
ton for side B.
To record on both sides, begin on side A. (If recording is started
from side B, the tape will not switch over to side A.)
Click on the first or last page to see other XL-HP550 service manuals if exist.