Read Sharp XL-HP404 User Guide / Operation Manual online
03/10/9
XL-HP404E(E)3.fm
24
XL-HP404E
TINSEA004AWZZ
T
a
pe Rec
o
rding
Recording on a cassette tape (continued)
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press
Press
the
(TAPE )
button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.
!
Recording from the radio
To interrupt recording:
Press the
Press the
button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the (TAPE ) button.
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Erasing recorded tapes
1
Press the TAPE button.
2
Follow steps 2 - 5 in "Recording from the radio".
1 Perform steps 1 - 6 in "Recording from a CD (CDs)" on page 23.
2 Within 5 seconds, press the / ( ) button to record on side A,
2 Within 5 seconds, press the / ( ) button to record on side A,
or the button for side B.
1 Programme discs and tracks. (See page 18.)
2 Press the
2 Press the
button.
3 Press the / ( ) button to record on side A, or the button for
side B.
1
Tune in to the desired station. (See page 19.)
2
Load a cassette into the cassette compartment with side A
facing you.
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button to choose one side or both sides.
...
To record on both sides.
...
To record on only one
side.
side.
4
Press the
button.
Recording will be paused.
5
Press the / ( ) button to record on side A, or the but-
ton for side B.
ton for side B.
To record on both sides, begin with side A. (If recording is start-
ed from side B, the tape will not switch over to side A.)
ed from side B, the tape will not switch over to side A.)
Click on the first or last page to see other XL-HP404 service manuals if exist.