Read Sharp XL-HP404 User Guide / Operation Manual online
03/10/9
XL-HP404E(E)3.fm
28
XL-HP404E
TINSEA004AWZZ
Adv
a
nced F
eatures
Timer and sleep operation (continued)
!
Sleep operation
The radio, compact disc and cassette tape can all be turned off
automatically.
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
!
To use timer and sleep operation together
You can play back the same source only (the function cannot be
switched).
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
RY/SET button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
"
3 hours - 5 minutes 5-minute intervals
"
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY/SET but-
ton.
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select "SLEEP
X : XX".
"X : XX" is sleep remaining time.
"X : XX" is sleep remaining time.
"
The remaining sleep time is displayed for about 10 seconds.
"
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
pressing the MEMORY/SET button (steps 4 - 5).
1
Press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select "SLEEP
OFF", and press the MEMORY/SET button.
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the desired playback time
(steps 2 - 10, pages 25 - 26).
(steps 2 - 10, pages 25 - 26).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback
start time
start time
1 minute - 3 hours
Click on the first or last page to see other XL-HP404 service manuals if exist.