Read Sharp XL-DAB9H User Guide / Operation Manual online
05/7/12
XL-DAB9H(E)4.fm
35
TINSEA068SJZZ
XL-DAB9H
Advanc
e
d Featu
res
Enhancing your system
Headphones
z
Before plugging in or unplugging the headphones, reduce the
volume.
volume.
z
Be sure your headphones have a 3.5 mm diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the volume control.
cally. Adjust the volume using the volume control.
Connecting source equipment
You can listen to sound of source equipment through the unit. Set
the function to "AUX" beforehand.
the function to "AUX" beforehand.
Connecting recording equipment
You can record sound of the unit to recording equipment. Use an
audio cable for connection.
audio cable for connection.
Notes:
z
Plug in each cable fully to prevent noise interference.
z
Refer to the manual for the connected equipment.
z
Do not connect the input and output sockets to the same external
equipment. Howling may result.
equipment. Howling may result.
z
To prevent noise interference, place the unit away from the tele-
vision.
vision.
Source equipment
Recording equipment
To audio output socket
(Commercially available)
(Commercially available)
To audio input sockets
(Commercially available)
(Commercially available)
Note:
The LINE IN/OUT sockets accept 2.5 mm mini plugs only.
Use the supplied 3.5 mm to 2.5 mm plug adaptor. (Only one
plug adaptor is supplied with the unit.)
The LINE IN/OUT sockets accept 2.5 mm mini plugs only.
Use the supplied 3.5 mm to 2.5 mm plug adaptor. (Only one
plug adaptor is supplied with the unit.)
Turn off all other equipment before making this connection.
Click on the first or last page to see other XL-DAB9H service manuals if exist.