XL-DAB10NH - Sharp Audio User Guide / Operation Manual. Page 8

XL-DAB10N 20H_001 UK.fm

When the FUNCTION button on main unit is pressed, the 
current function will change to different mode. Press the 
FUNCTION button repeatedly to select desired function.

Note:
The backup function will protect the memorised function 
mode for a few hours should there be a power failure or the 
AC power lead becomes disconnected.

When the EQUALIZER button is pressed, the current 
mode setting will be displayed. To change to a different 
mode, press the EQUALIZER button repeatedly until the 
desired sound mode appears. 

In this example, the clock is set for the 24-hour (00:00)
display.

To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.

[When the power is on]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.

Note:
The “00:00” will appear when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.

To readjust the clock:
Perform “Setting the clock” from step 1.

■ Function (on main unit only)

■ Equaliser

TUNER

CD

USB

DAB

AUX IN

iPod

POPS

VOCAL

FLAT

ROCK

CLASSIC

JAZZ

For rock music.

For pop music.

No equalization.

For classical music.

For jazz.

Vocals are enhanced.

No equalisation.

For rock music.

For classical music.

For pop music.

For jazz.

Vocals are enhanced.

Press the ON/STAND-BY button to turn to stand-by
mode.

Press and hold the CLOCK/TIMER button until “00:00”
appear.

Within 10 seconds, press the 

 or 

 button to

adjust the hour and then press the CLOCK/TIMER
button. Press the 

 or 

 button once to advance

the time by 1 hour. Hold it down to advance
continuously.

Press the 

 or 

 button to adjust the minutes and

then press the CLOCK/TIMER button. Press the 

 or

 button once to advance the time by 1 minute. Hold

it down to advance continuously.