Read Sharp XL-DAB10NH User Guide / Operation Manual online
XL-DAB10N 20H_001 UK.fm
6
9
9
Remote control (continued)
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-3, R6, HP-7 or
similar).
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-3, R6, HP-7 or
similar).
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
and the sensor on the unit with a soft cloth.
●
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
●
Keep the remote control away from moisture, heat,
shock, and vibrations.
shock, and vibrations.
Check the remote control after checking all the
connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
General control
Press the ON/STAND-BY button to turn the power on.
●
If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
16 or higher, the volume will start at 16.
●
If you turn the unit off then on again with the volume
level set to less than 15, it will turn on again at the level
set.
Turn the volume knob towards VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
press VOLUME +/– (on remote control) to increase or
decrease the volume.
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up.
To cancel the extra bass mode, press the X-BASS button
again.
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up.
To cancel the extra bass mode, press the X-BASS button
again.
The main unit will enter the stand-by mode after 15
minutes of inacitivity during:
minutes of inacitivity during:
iPod : No connection.
CD/USB : In the stop mode.
DAB : No reception of broadcast signal.
AUX IN : No detection of input signal or very low sound audibility.
CD/USB : In the stop mode.
DAB : No reception of broadcast signal.
AUX IN : No detection of input signal or very low sound audibility.
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
button on the remote control. Press again to restore the
volume.
■ Test of the remote control
XL-DAB10
0.2 m - 6 m
(8" - 20')
Remote sensor
■ To turn the power on
After use:
Press the ON/STAND-BY button to enter the power stand-
by mode.
by mode.
■ Volume auto set-in
■ Volume control
■ Extra bass control (X-BASS)
■ Auto power off function
■ Muting
XL-DAB10
Click on the first or last page to see other XL-DAB10NH service manuals if exist.