Read Sharp XL-560E (serv.man2) Service Manual online
– 7 –
XL-560H/E,570H/E
P
R
E
P
ARA
TI
O
N
FO
R
US
E
●
U
n
plu
g t
he
A
C
pow
er
lea
d f
rom
t
h
e
A
C
socket before connecting or disconnecting
any component.
Caution for XL-570H:
●
Before connecting the speakers to the
unit, connect the speaker wires to the
spe
aker
s
f
ir
s
t.
T
h
e
n
, co
nn
ect
th
e
speaker wire to the terminals on the unit.
●
Connect the speakers to the main unit,
and then use the system. If any of the
speakers is not connected, the main unit
or the speakers may malfunction or may
be damaged.
■
Speaker connection
Connect each speaker wire to the SPEAKER ter-
minals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
●
C
onn
ect
t
he
w
ir
e
w
it
h
th
e w
h
it
e
l
ine
t
o
t
h
e
minus (
−
) terminal and the plain wire to the
plus (+) terminal.
Notes:
●
Do not mix the right channel and left channel
w
ir
ing w
hen con
nec
ti
n
g
t
h
e
s
p
e
a
k
e
rs
to
t
h
e
unit.
●
Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.
●
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Caution:
●
T
he speaker
s incl
uded
w
it
h
t
he
uni
t
shou
ld
only be used with the XL-570H or XL-560H.
Do not use them with other models. Do not
connect the XL-570H's or XL-560H's speaker
terminals to any speakers other than those in
-
cluded with the unit.
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
SPEAKERS
LEFT
RIGHT
2
1
3
Right speaker
Left speaker
Black
White
line
Black
In the case of XL-560H
In the case of XL-570H
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
SPEAKERS
LEFT
RIGHT
2
1
3
Right speaker
Left speaker
White
line
Black
Black
Black
US
IN
G
E
X
TE
RNAL
UNI
TS
■
CD digital output (optical)
The CD digital signal from this unit can be
recorded by other DAT or MiniDisc recorders.
1
Remove the DIGITAL OUT socket cover.
2
Use a commercially available digital cable to
connect the unit to the OPTICAL IN socket of
a MiniDisc recorder or a DAT.
3
Put the external unit in the recording mode.
4
Play a CD on this unit.
Note:
●
Only CD signals can be output.
●
B
e
fo
re
pluggi
ng in
or
unpl
ugg
ing
t
he
head
-
phon
es,
m
a
ke sur
e t
he volum
e
level
is r
e
-
duced.
●
B
e
sur
e your
head
phon
es have
a 3.
5 m
m
(1/8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
●
When headphones are connected, the speak
-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
■
Headphones
Commercially available digital cable
■
VIDEO/AUX (Audio signal) input
To listen to or record signals from external
sources through this unit:
1
Use an RCA lead to connect the desired ex
-
ternal unit to the VIDEO/AUX sockets.
(red
→
right channel, white
→
left channel)
●
When using
vi
deo
equipm
en
t (
L
aser
D
isc
player, VCR), be sure to connect the audio out-
put to this unit and the video output to a tele-
vision.
2
Press the ON/STAND-BY button to turn the
power on.
3
Press the FUNCTION button until "AUX" ap
-
pears in the display.
4
Operate the external unit.
5
To record the sound from the external unit,
perform steps 2 - 4 of the "Recording from
the built-in radio" section.
Note:
●
To prevent hum interference, do not place this
unit near television receivers.
External unit
Click on the first or last page to see other XL-560E (serv.man2) service manuals if exist.