Read Sharp XL-560E (serv.man2) Service Manual online
XL-560H/E,570H/E
– 6 –
OPERATION MANUAL (FOR XL-560H/570H)
■
Remote control
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit with
a soft cloth.
●
Exposing the sensor on the main unit to strong
li
ght
m
a
y
i
n
te
rf
ere
w
it
h
oper
at
ion.
C
h
a
nge t
h
e
lighting or the direction of the unit.
●
Keep the remote control away from moisture, ex-
cessive heat, shock, and vibrations.
15
15
0.2 m - 6 m
(8" - 20")
PREPARATION FOR USE
RE
S
E
TTI
NG
THE
MI
CRO
-
CO
MP
UTE
R
Reset the microcomputer under the following
conditions:
●
To erase all of the stored memory contents
(clock and timer settings, and tuner and CD
presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
2
U
n
plug
the
A
C
pow
er
lead f
rom
t
he A
C
INPUT socket on this unit.
3
Whilst pressing down the MEMORY/SET but
-
ton and the BASS/TREBLE button, plug the
AC power lead into the AC INPUT socket on
this unit.
Caution:
●
The operation explained above will erase all
data stored in memory, such as clock and timer
settings, and tuner and CD presets.
1
3
3
2,3
S
E
TTI
NG
THE
CLO
CK
In this example, the clock is set for the 24-hour
(0:00) system.
1
Press the CLOCK/TIMER/SLEEP button to enter
the time check mode.
2
Within 3 seconds, press the MEMORY/SET but-
ton.
3
Turn the jog dial to select the time display mode.
"0:00"
→
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
→
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
●
Note that this can only be set when the unit is first
installed or it has been reset.
4
Press the MEMORY/SET button.
5
Adjust the hour by turning the jog dial.
●
When the jog dial is turned one click clockwise,
the time will increase by 1 hour. When it is turned
one click anti-clockwise, the time will decrease by
1 hour.
Keep turning the jog dial to change the time con-
tinuously.
●
When the 12-hour display is selected, "AM" will
change automatically to "PM".
6
Press the MEMORY/SET button.
7
Adjust the minutes by turning the jog dial.
●
When the jog dial is turned one click clockwise,
th
e
t
im
e
w
ill i
n
c
re
a
s
e
b
y
1
m
in
u
te
. W
h
e
n
it
is
turned one click anti-clockwise, the time will de-
crease by 1 minute.
Keep turning the jog dial to change the time con-
tinuously.
●
The hour setting will not advance even if minutes
advance from "59" to "00".
8
Press the MEMORY/SET button.
●
The clock starts operating from "0" seconds. (Sec-
onds are not displayed.)
Note:
●
In the event of a power failure or when the AC
power lead is disconnected, the clock display will
go out.
When the AC power supply is restored, the clock
display will flash on and off to indicate the time
when the power failure occurred or when the AC
power lead was disconnected.
If
t
h
is
h
appe
ns
, f
o
llo
w
t
h
e
pr
oc
ed
ur
e b
e
lo
w
t
o
change the clock time.
To change the clock time:
Perform steps 1, 2 and 5 - 8 above.
To change the time display mode:
①
Perform steps 1 - 3 in the section "RESET-
TING THE MICROCOMPUTER".
②
Perform steps 1 - 8 above.
MEMORY/
SET
CLOCK/TIMER/
SLEEP
Jog dial
(Main unit operation)
0:00 AM 12:00
2
3
4
5
6
7
8
Click on the first or last page to see other XL-560E (serv.man2) service manuals if exist.