Read Sharp XL-560E (serv.man2) Service Manual online
XL-560H/E,570H/E
– 12 –
TEST MODE
The test mode applied to this microcomputer has three modes, namely ordinary test mode to be used for adjustment or
measurement, aging test mode to be used for aging test, and self-diagnosis test mode for self-inspection in case of final product
inspection.
The test mode specification prescribes the microcomputer with RDS (RH-IX0014SJZZ Serial No. 904xxxxx) and the microcomputer
with RDS (RH-IX0021SJZZ Serial No. 905xxxxx~ ).
measurement, aging test mode to be used for aging test, and self-diagnosis test mode for self-inspection in case of final product
inspection.
The test mode specification prescribes the microcomputer with RDS (RH-IX0014SJZZ Serial No. 904xxxxx) and the microcomputer
with RDS (RH-IX0021SJZZ Serial No. 905xxxxx~ ).
1. Turning on the test mode
To turn on the specific test mode, press the POWER button, holding down the following two buttons in the ordinary stand-by
mode (power off state). In this case only the main unit button is valid. Even when the POWER of remote control button is set
to on, the test mode is not turned on.
mode (power off state). In this case only the main unit button is valid. Even when the POWER of remote control button is set
to on, the test mode is not turned on.
[Ordinary test mode]
1. CD Test Mode (TEST 1)………………………… BASS/TREBLE + PLAY
2. Tuner Test Mode (TEST 2)……………………… FF/FWD + MEMORY/SET
3. Electronic volume Test Mode (TEST 3)………… STOP + BASS/TREBLE
4. Timer Test Mode (TEST 4)……………………… FF/FWD + BAND
5. LCD Test Mode (TEST 5)………………………… MEMORY/SET + REW/REV
1. CD Test Mode (TEST 1)………………………… BASS/TREBLE + PLAY
2. Tuner Test Mode (TEST 2)……………………… FF/FWD + MEMORY/SET
3. Electronic volume Test Mode (TEST 3)………… STOP + BASS/TREBLE
4. Timer Test Mode (TEST 4)……………………… FF/FWD + BAND
5. LCD Test Mode (TEST 5)………………………… MEMORY/SET + REW/REV
FF/FWD + REC PAUSE
[Self-diagnosis Test Mode]
1. Button input diagnosis test mode (TEST6).………
* Only for this mode four turning-on buttons are ……
provided. The differ insignificantly in processing
after turning-on.
For the microcomputer without RDS, there are two
provided. The differ insignificantly in processing
after turning-on.
For the microcomputer without RDS, there are two
turning-on buttons, since the two buttons (using the
RDS buttons) are not provided.
RDS buttons) are not provided.
FUNCTION + RDS PTY-TI
(RDS circuit is only for XL-560H/570H)
Click on the first or last page to see other XL-560E (serv.man2) service manuals if exist.