Read Sharp XL-515H (serv.man3) Service Manual online
XL-515H,515HR/CP-515
– 8 –
Figure 8
How to remove the pickup (See Fig. 8)
1. Remove the mechanism cover, paying attention to the
pawls (A1) x 4 pcs.
2. Remove the screws (A2) x 2 pcs., to remove the shaft (A3)
x 1 pc.
3. Remove the stop washer (A4) x 1 pc., to remove the gear
(A5) x 1 pc.
4. Remove the pickup.
Note:
After removing the optical pickup connector wrap the front
end of connector in conductive aluminium foil so as to
prevent damage of optical pickup by static electricity.
end of connector in conductive aluminium foil so as to
prevent damage of optical pickup by static electricity.
REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1,to 5 of the disassembly method to remove the
CD mechanism.
CD mechanism.
Pickup Unit
( A2 ) x2
ø2.6 x6mm
ø2.6 x6mm
( A1 ) x2
CD Mechanism
Shaft
( A3 ) x1
( A3 ) x1
Gear
( A5 ) x1
( A5 ) x1
StopWasher
( A4 ) x1
( A4 ) x1
Mechanism Cover
( A1 ) x2
Click on the first or last page to see other XL-515H (serv.man3) service manuals if exist.