XL-35 (serv.man21) - Sharp Audio Service Manual (repair manual). Page 6

Read Sharp XL-35 (serv.man21) Service Manual online

XL-35H
– 6 –
TAPE MECHANISM SECTION
Perform steps 1 to 5 and 8 of the disassembly method to
remove the tape mechanism. (See page 5.)
How to remove the record / playback and erase
heads (See Fig. 6-3.)
1. Remove the screws (A1) x 2 pcs., to remove the erase
head.
2. Remove the screws (A2) x 2 pcs., to remove the record/
playback head.

Note:
After replacing the heads and  performing the azimuth
adjustment, be sure to apply screwlock.
How to remove the pinch roller (See Fig. 6-4.)
1. Carefully bend the pinch roller pawl in the direction of the
arrow 
<A>
, and remove the pinch roller (B1) x 1 pc.,
upwards.
How to remove the belts (See Fig. 6-5.)
1. Remove the main belt (C1) x 1 pc.,  from the motor pulley.
2. Remove the FF/REW belt (C2) x 1 pc., from the REW/FF
roller.
3. Put on the belts in the reverse order of removal.
Note:
When putting on the belt, ascertain that the belt is not twisted,
and clean it.
How to remove the motor
 (See Fig. 6-6.)
1. Remove the main belt.
2. Remove the screws (D1) x 2 pcs., to remove the motor
bracket.
3. Remove the screws (D2) x 3 pcs., to remove the motor.
Note:
When mounting the motor, pay attention to the motor mounting
angle.
<A>
Pinch Roller
(B1)x1
Pinch Roller
Pawl
REMOVING AND REINSTALLING THE MAIN PARTS
Main Belt
(C1)x1
FF/REW Belt
(C2)x1
REW/FF
Clutch
Motor
Erase Head
Record/
Playback Head
(A1)x2
ø2x8mm
(A2)x1
ø2x3mm
(A2)x1
ø2x7mm
(D1)x1
ø2x4mm
(D2)x3
Special
Screw
Motor
Bracket
Motor
Motor
(D1)x1
ø2x4mm
(K1)x3
ø2.6x10mm
Top Cabinet
CD Mechanism
(J1)x4
ø2.4x10mm
(J2)x1
ø2.6x10mm
(J3)x2
(J3)x1
Top Cabinet
CD PWB
Open/Close
Switch PWB
CD Mechanism
Figure 6-1
Figure 6-2
Figure 6-3
Figure 6-4
Figure 6-5
Figure 6-6

Display

Click on the first or last page to see other XL-35 (serv.man21) service manuals if exist.

Random: