Read Sharp XL-30 (serv.man2) User Guide / Operation Manual online
8
(Continued)
■
Connecting the AC power lead
AC 230 V, 50Hz
To an AC socket
To AC INPUT
Connect the AC power lead to the AC power input
socket, then connect the AC power lead plug to an
AC socket.
socket, then connect the AC power lead plug to an
AC socket.
Notes:
●
Unplug the AC power lead from the AC socket if
the unit is not to be used for a prolonged period
of time.
the unit is not to be used for a prolonged period
of time.
●
Never use a power lead other than the one sup-
plied. Otherwise, a malfunction or an accident
may occur.
plied. Otherwise, a malfunction or an accident
may occur.
15
15
●
When inserting or removing the batteries, push
them towards the
them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the
unit to malfunction.
unit to malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction in-
dicated in the battery compartment.
dicated in the battery compartment.
●
Replace all old batteries with new ones at the
same time.
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
mote control and the sensor on the main unit
with a soft cloth.
●
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
light may interfere with operation. Change the
lighting or the direction of the unit.
●
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
excessive heat, shock, and vibrations.
●
2 “AA” size batteries (UM/SUM-3, R6, HP-7
or similar)
or similar)
●
Batteries are not included.
0.2m - 6m
(8” - 20”)
(8” - 20”)
■
Remote control
10 cm (4")
10 cm (4")
20 cm (8")
10 cm (4")
■
Placing the system
●
Be sure to keep space between the units for ven-
tilation.
tilation.
●
Keep the top of this unit at least 20 cm (8") away
from the wall, and the back at least 10 cm (4")
away.
from the wall, and the back at least 10 cm (4")
away.
Note:
●
Do not place the system or speakers near the
television set as the magnetic fields produced
may cause irregular colours to be displayed.
television set as the magnetic fields produced
may cause irregular colours to be displayed.
**XL-30H(SUK)P01-P08
00.2.2, 3:53 PM
8
Click on the first or last page to see other XL-30 (serv.man2) service manuals if exist.