Read Sharp SM-SX1 (serv.man2) Service Manual online
SM-SX1H
– 3 –
NAMES OF PARTS
SACD
DIGIT
AL1
DIGIT
AL2
LINE1
LINE2
3
2
4
1
4
V
olume Control Knob
Controls the sound level.
T
o
cut the output to the speaker with the
power turned on:
Set the sound level at “0” then press and
hold the corresponding input selector but-
ton for 2 seconds or more.
The signal output to the speaker returns
when you reset the sound level at “1” or
higher
.
1
Power Button
T
urns the unit on or of
f.
2
Input Selector Buttons
Used to select the equipment source you
want to play back.
When the power is turned on, the unit is
switched to “SACD”.
3
V
olume Display
Displays the sound level within the range of
“0” - “128”.
2
L
ine 1 Input T
erminals
Connect equipment using RCA cords.
3
Line 2 I
nput T
erminals
Connect equipment using RCA cords.
1
Line Output T
erminals
Connect equipment using RCA cords.
4
SACD/1-bit Signal Input T
erminals
Connect the super audio CD player using
RCA cords or the 1-bit signal cable included
with your Sharp SACD player
.
When both the RCA cords and the 1-bit
signal cable are connected, signals from
the latter have priority
.
When nothing is connected to the 1 BIT in-
put terminal, signals from the RCA cords are
used.
(If you use the 1 BIT input terminal, refer to
the operation manual for the super audio CD
player
.)
These terminals send signals of the external
equipment connected to the RCA (of the
SACD), LINE 1 or LINE 2 terminal.
12
4
3
LINE 1
LINE 2
SACD
LINE OUT
(COAXIAL)
DIGITAL 1
DIGITAL 2
DIGITAL OUT
(OPTICAL)
(OPTICAL)
RIGHT
+
-
LEFT
+
-
RATED IMPEDANCE : 8
SPEAKERS
2
Click on the first or last page to see other SM-SX1 (serv.man2) service manuals if exist.