Read Sharp SD-PX15H (serv.man7) User Guide / Operation Manual online
E-51
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Ad
v
a
nced
F
e
atures
- Cha
n
ging the
de
fa
ult s
e
ttings
of the
a
m
pli
fie
r -
Changing the default settings of the amplifier
Change settings according to the connected speakers.
Speaker size setting (See pages 51, 52.)
Speaker delay setting (See page 52.)
Speaker level setting (See page 53.)
Test tone (See page 53.)
Speaker delay setting (See page 52.)
Speaker level setting (See page 53.)
Test tone (See page 53.)
Example:
If the right surround speaker is 3.3 m away from the listening position, change set-
tings as shown below (adjust the SR).
tings as shown below (adjust the SR).
Note:
You cannot change the default settings whilst playing SACD/DVD-Audio discs.
"
Speaker size setting
You can change the sizes of the front speakers, centre speaker, and surround speak-
ers, or turn on or off the centre speaker and surround speakers.
ers, or turn on or off the centre speaker and surround speakers.
1
In "Speaker delay setting", set the right surround speaker (SR) to 3.3 m.
2
In "Speaker level setting", slightly increase the level of the right surround speaker
as it is a little farther than others (see page 53).
as it is a little farther than others (see page 53).
3
In "Test tone", check the sound from each speaker (see page 53).
FL
FR
SL
Default setting: 2 m
SR
SW
CT
FL
FR
SL
SR
SW
CT
3.3 m
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
UP button.
2
Within 10 seconds, press the or button to
select "SP SIZE", and press the ENTER but-
ton.
select "SP SIZE", and press the ENTER but-
ton.
3
Within 10 seconds, press the or button to
select the desired speaker.
select the desired speaker.
The indicators of selected speakers flash.
If you press during the
operation, you can go
back one step.
operation, you can go
back one step.
4
SHARP TI
NSZ
A
0
5
2
A
WZ
Z
Click on the first or last page to see other SD-PX15H (serv.man7) service manuals if exist.