Read Sharp SD-EX100H (serv.man6) Service Manual online
– 11 –
SD-EX100H
Initializing the mechanism
The mechanism is initialized and checked in the following cases.
1. The power is turned on for the first time after resetting the microcomputer.
2. The mechanism is not in the loading or ejecting completed state when the power is turned on.
1. The power is turned on for the first time after resetting the microcomputer.
2. The mechanism is not in the loading or ejecting completed state when the power is turned on.
Initializing the mechanism
Start
End
Mechanism up
switch
OK?
Close
Open
The tray moves downward until
the close switch is turned on.
the close switch is turned on.
The CD mechanism moves
downward until the switch is
turned on.
downward until the switch is
turned on.
The CD mechanism moves
downward until the switch is
turned on.
downward until the switch is
turned on.
The tray moves upward until
the open switch is turned on.
the open switch is turned on.
The tray moves downward until
the close switch is turned on.
the close switch is turned on.
OK
OK?
OK?
OK
OK
OK?
OK
OK?
OK
NG
Er-CD TA?O0
NG
Er-CD TA?D0
NG
Er-CD TA?C0
The open switch
is checked.
is checked.
The up/down
motor and the
down switch are
checked.
motor and the
down switch are
checked.
NG
Er-CD TA?D0
The up/down
motor and the
down switch are
checked.
motor and the
down switch are
checked.
The tray motor
and the close
switch are
checked.
and the close
switch are
checked.
NG
Er-CD TA?C0
The tray motor
and the close
switch are
checked.
and the close
switch are
checked.
Click on the first or last page to see other SD-EX100H (serv.man6) service manuals if exist.