Read Sharp SD-EX100H (serv.man21) Service Manual online
SD-EX100H
– 8 –
REMOVING AND REINSTALLING THE MAIN PARTS
How to remove the Optical Pickup
(See Fig. 8-1)
(See Fig. 8-1)
1. Remove the stop washer (A1) x 1 pc and gear (A2) x 1 pc.
2. Remove the screws (A3) x 2 pcs and shaft (A4) x 1 pc.
3. Remove the optical pickup.
2. Remove the screws (A3) x 2 pcs and shaft (A4) x 1 pc.
3. Remove the optical pickup.
Note:
After pulling out the optical pickup connector, wrap the tip of
it with conductive aluminium foil or the like to protect the optical
pickup from the static electricity.
After pulling out the optical pickup connector, wrap the tip of
it with conductive aluminium foil or the like to protect the optical
pickup from the static electricity.
Figure 8-1
Optical Pickup
(A3)x2
ø2.6x6mm
ø2.6x6mm
CD Mechanism
Shaft (A4)x1
Gear (A2)x1
Stop Washer (A1)x1
WIRING PROCESS DIAGRAM
1-BIT SECTION
Figure 8-2
CD MECHANISM SECTION
Perform steps 1 to 15 of the disassembly method to remove
the CD mechanism. (See page 5.)
the CD mechanism. (See page 5.)
Tie nylon straps around cords as illustrated.
Click on the first or last page to see other SD-EX100H (serv.man21) service manuals if exist.