Read Sharp QT-V5E (serv.man2) User Guide / Operation Manual online
39
04/6/15
QT-V5E_UK_4.fm
9HX80432100003
QT-V5E
2
3
4
5
6
7
8
1
Re
fe
re
nces
- Er
ro
r indic
a
to
rs
a
nd wa
rn
ings
/ M
a
int
e
na
nc
e
/ S
p
e
c
ific
a
tions
-
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the TV screen.
messages are displayed on the TV screen.
Maintenance
!
Cleaning the cabinet
!
Cleaning the laser pickup lens
Poor performance during DVD/CD playback (skipping or jumping) can be caused by a
dirty or contaminated laser pick up lens. If this happens then the use of a commer-
cially available lens cleaning discs may restore normal operation. Contact your sup-
plier or local DVD software dealer to obtain lens cleaning discs. Ensure all included
instructions/documentation are carefully followed.
dirty or contaminated laser pick up lens. If this happens then the use of a commer-
cially available lens cleaning discs may restore normal operation. Contact your sup-
plier or local DVD software dealer to obtain lens cleaning discs. Ensure all included
instructions/documentation are carefully followed.
!
Care of discs
Discs are fairly resistant to damage, however mistracking can occur due to an accu-
mulation of dirt on the disc surface. Follow the guidelines below for maximum enjoy-
ment from your disc collection and player.
mulation of dirt on the disc surface. Follow the guidelines below for maximum enjoy-
ment from your disc collection and player.
"
Do not write on either side of the disc, particularly the non-label side from which
signals are read. Do not mark this surface.
signals are read. Do not mark this surface.
"
Keep your discs away from direct sunlight, heat, and excessive moisture.
"
Always hold the discs by the edges. Fingerprints, dirt, or water on the discs can
cause noise or mistracking. If a disc is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the centre, along the radius.
cause noise or mistracking. If a disc is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the centre, along the radius.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
TV screen
Meaning
The region number of the DVD is not 2 or ALL.
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
dry cloth.
"
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
cabinet finish.
"
Do not apply oil to the inside of the equipment as this may cause malfunctions.
WRONG REGION
NO
YES
Correct
Correct
Power source
AC 230 - 240 V, 50 Hz
DC 12 V ["D" size (UM/SUM-1, R20 or HP-2) battery 8]
DC 3 V ["AA" size (UM/SUM-3, R6 or HP-7) battery 2 for
memory]
memory]
Power consumption
23 W
Output power
RMS: 10 W (5 W + 5 W) (10 % T.H.D., 1 kHz)
Speakers
8 cm full-range speaker 2
Dimensions
Width: 420 mm
Height: 150 mm
Depth: 260 mm
Height: 150 mm
Depth: 260 mm
Weight
5.2 kg
Signal system
PAL/NTSC colour
Supported disc types
DVD (region number 2 or ALL), SVCD, VCD, audio CD,
CD-R, CD-RW, MP3
CD-R, CD-RW, MP3
Video signal
Horizontal resolution: 500 lines
S/N ratio: 50 dB
Audio signal
Frequency character-
istics
istics
Linear PCM DVD:
20 Hz to 20 kHz (sampling rate:
48 kHz)
48 kHz)
20 Hz to 20 kHz (sampling rate:
96 kHz)
96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio
CD: 80 dB (1 kHz)
Dynamic range
Linear PCM DVD: 70 dB
CD: 70 dB
Total harmonic distor-
tion ratio
tion ratio
0.01 % maximum
Audio output termi-
nals
nals
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Optical digital output: Square type 1
Analogue output: RCA type 1 pair (L/R)
Video output termi-
nals
nals
SCART output: SCART terminal 1
Video output: RCA type 1
S-video output: S-terminal 1
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Click on the first or last page to see other QT-V5E (serv.man2) service manuals if exist.