QT-CD250 (serv.man4) - Sharp Audio User Guide / Operation Manual. Page 8

<P=004>

■

Set the function switch to TAPE.

Load the cassette into the cassette compart-
ment.

Press the PLAY button.

To advance the tape, press the STOP/EJECT
button, then press the F FWD button. To rewind,
press the STOP/EJECT button, then press the
REWIND button.

To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.

To stop playback:
Press the STOP/EJECT button.

●

Be sure not to press the PLAY and REWIND
buttons simultaneously, or the tape will become
damaged.

●

Before changing from one tape operation to an-
other, press the STOP/EJECT button.

●

Do not press the PAUSE button whilst the fast
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.

●

Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.

●

Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.

●

Connect the headphones plug to the PHONES
socket located on the rear of the unit. The spea-
kers will be automatically disconnected. Adjust
the volume by using the VOLUME control.

QT-CD250H(SUK) TINSE0043SJZZ