Read Sharp QT-CD250 (serv.man4) User Guide / Operation Manual online
<P=002>
RECORDING
●
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
make a preliminary test to ensure that the desired
material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME control may be adjusted with no
effect on the recorded signal. (Variable Sound
Monitor)
effect on the recorded signal. (Variable Sound
Monitor)
●
Metal and CrO
2
tapes cannot be used for recor-
ding.
■
Recording from the built-in CD player
1
Set the function switch to CD.
●
Load the disc to be recorded.
2
Load the cassette into the cassette compart-
ment.
ment.
3
Press the RECORD button.
4
Press the PLAY/PAUSE (
0 6
) button on the CD.
To stop recording:
ON/STAND-BY
(Function)
(Function)
STOP
TUNING
TUNING
PLAY / PAUSE
TUNING
TUNING
REPEAT
BAND
BAND
Press the STOP/EJECT button.
The tape will stop.
The tape will stop.
Note:
●
If the STOP(
■
) or PLAY/PAUSE (
0 6
) button
on the CD player is pressed whilst recording, or
if the CD comes to its end, the tape deck will not
stop.
if the CD comes to its end, the tape deck will not
stop.
To record a specific track:
Press the UP (
Press the UP (
2 / 4
) or DOWN (
3 / 5
) button
on the CD player until the desired track number is
displayed, then start recording.
displayed, then start recording.
■
Recording from the built-in radio
1
Set the function switch to TUNER.
●
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
To stop recording:
Press the STOP/EJECT button.
Press the STOP/EJECT button.
■
Erasing a recorded tape
1
Set the function switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
compartment.
3
Press the RECORD button.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry
cloth.
a diluted soap solution, then wipe with a dry
cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
QT-CD250H(SUK) TINSE0043SJZZ
10
Click on the first or last page to see other QT-CD250 (serv.man4) service manuals if exist.