HT-M700H - Sharp Audio User Guide / Operation Manual. Page 67

05/5/27

HT-M700H(E)7.fm

TINSEA065SJZZ

HT-M700H

„

Poor performance during DVD/CD playback (skipping or jumping)
can be caused by a dirty or contaminated laser pick up lens. If this
happens then the use of a commercially available lens cleaning
discs may restore normal operation. Contact your supplier or local
DVD software dealer to obtain lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.

„

Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.

z

Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.

z

Do not apply oil to the inside of the unit. It may cause malfunc-
tions.

 

„

Discs are fairly resistant to damage, however mistracking can occur
due to an accumulation of dirt on the disc surface. Follow the guide-
lines below for maximum enjoyment from your disc collection and
player.

z

Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.

z

Keep your discs away from direct sunlight, heat, and excessive
moisture.

z

Always hold the discs by the edges. Fingerprints, dirt, or water on
the discs can cause noise or mistracking. If a disc is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.

When you load an unplayable disc or fail to perform operations
properly, the following messages are displayed on the TV screen.

The disc cannot be played with this 
unit or the disc is loaded in an in-
correct way.

The region number of the DVD is 
neither "2" nor "ALL".

The disc does not support the oper-
ation described in this operation 
manual.

Disc Error

Wrong Region

8