GX-M10H (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 7

Press the ON/STAND-BY button to turn the power on.

After use:
Press the ON/STAND-BY button to enter the power stand-by 
mode.

The display and subwoofer light can be changed.
Main unit:
1)  Press DEMO/(DIMMER)/  button for more than 3 seconds. 
   The current mode will be displayed.
2)  Within 5 seconds, press DEMO/(DIMMER)/  button to change 

the mode.

Remote control:
Press DEMO/DIMMER button to change the mode.

MODE 1

MODE 2

MODE Off

(Display backlight on and Subwoofer light off)

(Display backlight on and Subwoofer light on)

(Display backlight off and Subwoofer light off)

  During battery/DC operation, the unit will be set to Demo mode 

off with display and subwoofer light in MODE 2 to reduce the 
battery power consumption.

  During MODE 2, press any button to light up the display 

backlight for a few seconds.

If you turn off and on the main unit with the volume set to 27 or 
higher, the volume starts at 16 and fades in to the last set level.

Press  VOLUME +/– buttons (on main unit) or  VOL +/– (on remote 
control) to increase or decrease the volume.

When you press any of the following buttons, the unit turns on.

  iPod  / , CD  / , USB  /  on the main unit or the remote 

control: selected function is activated.

  TUNER/AUDIO IN on the main unit: last tuner or audio function 

is activated.

  TUNER or AUDIO IN on the remote control: the unit turns on 

with the selected function activated.

The main unit will enter the stand-by mode (when iPad, iPod, 
iPhone, guitar or microphone is not connected) after 15 minutes 
of inactivity during:
iPod:  

Not docked.

Audio In: 

 No detection of input signal.

CD:  

In the stop mode or no disc.

USB:  

In the stop mode or no media.

Note:
However, if iPod or iPhone is docked, the unit will begin charging. 
“iPod CHARGING” will be displayed.

The auto resume function will resume the last function and 
playback, should  there be a power failure or the AC power lead 
becomes disconnected. However, CD/MP3 programme and 
random mode are not memorised.

When the EQ/(X-BASS) button is pressed, the current mode 
setting will be displayed. To change to a different mode, press 
the EQ/(X-BASS) button repeatedly until the desired sound mode 
appears.

ROCK

FLAT

VOCAL

HIP HOP

REGGAE

SALSA

No equalisation.

For rock music.

Vocals are enhanced.

For hip hop music.

For salsa music.

For reggae music.

The volume is muted temporarily when pressing the 

 button on 

the remote control. Press again to restore the volume.

When the power is fi rst turned on, the unit will enter the extra bass 
mode which emphasises the bass frequencies, and “X-BASS” will 
appear. To cancel the extra bass mode, press the EQ/(X-BASS) 
button. The last equaliser mode will turn on. 
To turn on the X-Bass mode again, press the EQ/(X-BASS) button 
for more than 2 seconds.

In this example, the clock is set for the 24-hour (0:00) display.
1  Press the ON/STAND-BY button to turn the power on.
2  Press the CLOCK/TIMER button.
3  Within 10 seconds, press the ENTER button. To adjust the 

time, press the 

 or 

 button and then press the 

ENTER button.

4  Press the 

 or 

 button to select 24-hour or 12-hour 

display and then press the ENTER button.

The 24-hour display will appear.
(0:00 -  23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)

GX-M10H_OM_UK_OK_JU.indd   Sek1:6

GX-M10H_OM_UK_OK_JU.indd   Sek1:6

2012-08-14   23:23:45

2012-08-14   23:23:45