Read Sharp FV-DB2ES User Guide / Operation Manual online
15
FV-DB2E
05/4/21
FVDB2E_UK.fm
TINSEA048SJZZ
FM Opera
tion
Listening to the FM
Notes:
!
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
matically at that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, move the operation lever toward TUNING
UP or TUNING DOWN.
UP or TUNING DOWN.
To receive an FM stereo transmission:
Press the BAND button to display the "ST" indicator.
Press the BAND button to display the "ST" indicator.
!
" " will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the BAND button to extinguish
the "ST" indicator. The reception changes to monaural, and the
sound becomes clearer.
the "ST" indicator. The reception changes to monaural, and the
sound becomes clearer.
Note:
When you press the INFO button, date and time appear for approxi-
mately 5 seconds.
When you press the INFO button, date and time appear for approxi-
mately 5 seconds.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the BAND button until "FM" ap-
pears on the display.
pears on the display.
3
Move the operation lever toward TUNING UP or TUNING
DOWN to tune in to the desired station.
DOWN to tune in to the desired station.
Manual tuning:
Move the operation lever as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
Hold the operation lever is down for 2 seconds or more, scan-
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
FM stereo receiving indicator
4
Click on the first or last page to see other FV-DB2ES service manuals if exist.