Read Sharp FV-DB2ES User Guide / Operation Manual online
10
FV-DB2E
05/4/21
FVDB2E_UK.fm
TINSEA048SJZZ
D
AB O
p
eration
Listening to the DAB (continued)
"
Selecting a station in the station list
Once a DAB station is received, you can select stations in the sta-
tion list.
tion list.
Note:
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction.
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction.
"
Manual tune
You can manually store stations which Auto tune cannot find. If
reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto tune
first.
reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto tune
first.
Exiting Manual tune:
Press the ENTER button to exit manual tuning.
Press the ENTER button to exit manual tuning.
1
Press the BAND button until "DAB" appears on the display.
2
Whilst receiving a DAB station, move the operation lever
toward TUNING UP or TUNING DOWN to select the desired
station.
toward TUNING UP or TUNING DOWN to select the desired
station.
!
The upper part of the display shows the current station
name, and the name of the station being scanned (with "
name, and the name of the station being scanned (with "
") appears in the lower part.
The current station name
The name of the station being scanned
!
If a station has one or more secondary
services, " " appears after the station
name. This indicates a secondary ser-
vice is also available.
services, " " appears after the station
name. This indicates a secondary ser-
vice is also available.
!
Whilst selecting a secondary service,
" " appears before the station name.
This indicates a primary service is also
available.
" " appears before the station name.
This indicates a primary service is also
available.
3
Within 30 seconds, press the ENTER button.
!
When the current station is primary with secondary, "P" lights
up.
up.
!
When the current station is secondary, "S" lights up.
!
When the current station is primary without other services,
no indicator lights up.
no indicator lights up.
1
Press the BAND button until "DAB" appears on the display.
2
Press the MENU button repeatedly to
select "Manual tune".
select "Manual tune".
3
Within 30 seconds, press the ENTER
button.
button.
4
Within 30 seconds, move the operation
lever toward TUNING UP or TUNING
DOWN to tune in to the desired station.
lever toward TUNING UP or TUNING
DOWN to tune in to the desired station.
5
Within 30 seconds, press the ENTER button.
!
Reception sensitivity appears. The
white block indicates the minimum re-
quired level and the solid blocks indicate
the current level.
white block indicates the minimum re-
quired level and the solid blocks indicate
the current level.
!
If the level is below the white block,
move the rod aerial or unit to improve re-
ception. When the level reaches the
white block, a multiplex name appears
and the multiplex will be added to the
service list.
move the rod aerial or unit to improve re-
ception. When the level reaches the
white block, a multiplex name appears
and the multiplex will be added to the
service list.
Click on the first or last page to see other FV-DB2ES service manuals if exist.