DK-UH2BK - Sharp Audio User Guide / Operation Manual. Page 22

Read Sharp DK-UH2BK User Guide / Operation Manual online

22
DK-UH2
DK-UH2(BK)
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
(*) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 8 to cancel the demonstration mode.
USB
Power source
DC IN 6V 
 2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power 
consumption
Power on : 5 W
Power stand-by: 0.3 W (*)
Output power
RMS: 3.8 W (1.9 W + 1.9 W) (10% T.H.D)
Speaker
1-way type speaker system
Speakers: 5 cm (2") - 6 ohms - Full Range
Speaker maximum  
input power
3.8 W/Channel
Speaker rated 
input power
1.9 W/Channel
Input terminals
Auxiliary (audio signal): 
500 mV/47 k ohms 
Dimensions
Width: 380 mm (15") 
Height: 157 mm (6-2/5") 
Depth: 221 mm (8-7/10")
Weight
1.2 kg (2.65 lbs)
   
USB host interface
Complies with USB 1.1/2.0 (Full Speed) 
Mass-Storage-Class.
Support Bulk only and CBI protocol.
Support File
MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 - 320 kbps)
WMA (64 - 192 kbps)
Other
Maximum total number of MP3/WMA files is 
40 000.
Maximum total number of folders is 200 
INCLUSIVE of root directory. (Folders which 
have non playable files also counted.)
The  ID3TAG  information  supported  are 
TITLE, ARTIST and ALBUM only.
Support ID3TAG version 1 and version 2.
File system 
support
Support USB devices with Microsoft 
Windows/DOS/FAT 12/FAT 16/FAT 32.
2 kbyte block length for sector.
Page of 24
Display

Click on the first or last page to see other DK-UH2BK service manuals if exist.