Read Sharp DK-UH2BK User Guide / Operation Manual online
18
DK-UH2
DK-UH2(BK)
Advanced Features
Timer and sleep operation
Timer
The unit turns on and plays back USB at a preset time for 30 minutes.
Before setting the alarm:
Setting the timer content
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse
the same setting, peform the following operations.
The timer setting will be memorised once it is entered. To reuse
the same setting, peform the following operations.
Notes:
During timer stand-by mode, the display indicator goes off. Press
the CLOCK button, the display indicator will lights up for 10
seconds.
During timer stand-by mode, if the TIMER button is pressed
for checking or cancelling the timer setting, the display indicator
light up.
the CLOCK button, the display indicator will lights up for 10
seconds.
During timer stand-by mode, if the TIMER button is pressed
for checking or cancelling the timer setting, the display indicator
light up.
1 Check that the clock is set to the correct time (refer page 11).
If it is not set, you cannot use the timer function.
2 Plug-in USB memory device to the unit (refer page 14).
1
Press the TIMER button.
2
Press the
or
button to adjust the hour.
Press the TIMER button.
3
Press the
or
button to adjust the minute.
Press the TIMER button.
4
Press the
or
button or VOL (+ or –) to select volume.
Press the TIMER button. “
” will appears on display.
5
Press the ON/STAND-BY button to enter the timer stand-by
mode.
The “TIMER” red indicator lights up and the unit is ready for
timer playback.
mode.
The “TIMER” red indicator lights up and the unit is ready for
timer playback.
6
When the preset time is reached, the system will power on
and playback automatically.
The volume will increase gradually until it reaches the preset
volume.
and playback automatically.
The volume will increase gradually until it reaches the preset
volume.
7
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
The timer will operate at the same time every day. It will
continue until the timer setting is cancelled. Cancel the timer
when it is not in use.
the power stand-by mode automatically.
The timer will operate at the same time every day. It will
continue until the timer setting is cancelled. Cancel the timer
when it is not in use.
MUSIC SYSTEM
DK-UH2
TIMER
E
SOUND
SNO
OZE/D
IM
MER
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CLO
CK
E S
OU
ND
/D
EM
O
4
4
7
6
TIMER
1
Press the TIMER button.
2
Within 10 seconds, press the
or
button to select “CALL”
and press the TIMER button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1
Press the TIMER button.
2
Within 10 seconds, press the
or
button to select “OFF”
and press the TIMER button.
Timer will be cancelled (the setting will not be cancelled).
Timer will be cancelled (the setting will not be cancelled).
1
Press and hold the TIMER button for more than 2 seconds.
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
Click on the first or last page to see other DK-UH2BK service manuals if exist.