Read Sharp CP-SW1000H (serv.man2) Service Manual online
CP-SW1000H
1 – 3
CHAPTER 1. GENERAL DESCRIPTION
[2] Specifications
[1] Important Service Notes (for U.K. only)
Before returning the unit to the customer after completion of a repair or adjustment it is necessary for the following withstand voltage test to be
applied to ensure the unit is safe for the customer to use.
applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
AC/DC
ADAPTOR
SHORT-CIRCUIT
AC POWER
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO SHELL OF DC CONNECTOR
WITHSTANDING
VOLTAGE TESTER
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL.
CP-SW1000H
CP-SW1000H for U.K.
General
Power source
AC 220 - 240 V ~ 50 Hz
Power consumption
Power on: 18 W
Power stand-by: 0.6 W(*)
Power stand-by: 0.6 W(*)
Amplification system
Subwoofer: Pulse width modulation
Output power
RMS: 100 W (50 W + 50 W) (DIN 45 324)
Audio input terminal
Analog input: RCA type x 1 pair (L/R)
Type
Subwoofer system
Impedance
4 ohms x 2
Dimensions
Width: 430 mm (16-15/16")
Height: 151 mm (5-15/16")
Depth: 323.5 mm (12-3/4")
Height: 151 mm (5-15/16")
Depth: 323.5 mm (12-3/4")
Weight
6.4 kg (14.11 lbs.)
Crossover frequency
80 Hz - 220 Hz
( * ) This power consumption value is obtained when in the power
stand-by mode.
CAUTION: “Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type”.
or equivalent type”.
General
Power source
AC 220 - 240V ~ 50 Hz
Power consumption
Power on: 18 W
Power stand-by: 0.6 W(*)
Power stand-by: 0.6 W(*)
Amplification system
Subwoofer: Pulse width modulation
Output power
RMS: 100 W (50 W + 50 W) (10% T.H.D.)
Audio input terminal
Analog input: RCA type x 1 pair (L/R)
Type
Subwoofer system
Impedance
4 ohms x 2
Dimensions
Width: 430 mm (16-15/16")
Height: 151 mm (5-15/16")
Depth: 323.5 mm (12-3/4")
Height: 151 mm (5-15/16")
Depth: 323.5 mm (12-3/4")
Weight
6.4 kg (14.11 lbs.)
Crossover frequency
80 Hz - 220 Hz
( * ) This power consumption value is obtained when in the power stand-
by mode.
1 – 1
Click on the first or last page to see other CP-SW1000H (serv.man2) service manuals if exist.