Read Sharp CD-PC671H User Guide / Operation Manual online
HK
<P=001>
USING EXTERNAL UNITS
■
Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources
through this unit:
through this unit:
1
Use an RCA lead to connect the desired external unit to the
VIDEO/AUX 1 or 2 sockets.
(red
VIDEO/AUX 1 or 2 sockets.
(red
→
right channel, white
→
left channel)
●
When using video equipment (Laser Disc player or VCR), be
sure to connect the audio output to this unit and the video
output to a television.
sure to connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
●
Select either "VIDEO 1" or "VIDEO 2".
4
Operate the external unit.
5
To record the sound from the external unit, perform steps 1
- 4 of the "Recording from the built-in radio" section on page
26.
- 4 of the "Recording from the built-in radio" section on page
26.
Note:
●
To prevent hum interference, do not place this unit near tele-
vision receivers.
vision receivers.
■
CD digital output (optical)
The CD digital signal from this unit can be recorded by
other DAT or MiniDisc recorders.
other DAT or MiniDisc recorders.
1
Remove the CD DIGITAL OUT socket cover.
2
Use a commercially available digital cable to connect the unit
to the OPTICAL IN socket of a MiniDisc recorder or a DAT.
to the OPTICAL IN socket of a MiniDisc recorder or a DAT.
3
Put the external unit in the recording mode.
4
Play a CD on this unit.
Note:
●
Only CD signals can be output.
■
Headphones
●
Before plugging in or unplugging the headphones, make sure
the volume level is reduced.
the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
and are between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
●
When headphones are connected, the speakers are discon-
nected automatically. Adjust the VOLUME control for the
desired volume.
nected automatically. Adjust the VOLUME control for the
desired volume.
Note:
●
If you use headphones, cancel the Dolby Pro Logic Surround
mode.
Even after the headphones are connected, if the unit is in the
Dolby Pro Logic Surround mode, sound will still be heard from
the surround and centre speakers.
mode.
Even after the headphones are connected, if the unit is in the
Dolby Pro Logic Surround mode, sound will still be heard from
the surround and centre speakers.
To the line output socket
RCA
lead
lead
Commercially available digital cable
CD-PC671H(SUK) TINSE0261AWZZ
28
Click on the first or last page to see other CD-PC671H service manuals if exist.