Read Sharp CD-PC651H User Guide / Operation Manual online
HK
<P=001>
(Continued)
■
Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode and the words will scroll across the dis-
play continuously.
the demonstration mode and the words will scroll across the dis-
play continuously.
Note:
●
When the power is on, the X-BASS/DEMO button can be used
to select the extra bass mode.
to select the extra bass mode.
To cancel the demonstration mode:
In the power stand-by mode (demonstration mode), press the
X-BASS/DEMO button to cancel the demonstration mode and to
enter the low power consumption mode.
When the X-BASS/DEMO button is pressed again, the unit will
return to the demonstration mode.
X-BASS/DEMO button to cancel the demonstration mode and to
enter the low power consumption mode.
When the X-BASS/DEMO button is pressed again, the unit will
return to the demonstration mode.
Note:
●
When the unit is in the low power consumption mode, the
display will disappear.
display will disappear.
■
To change the brightness of the display
Press the DIMMER button.
●
The display will be made dimmer.
Note:
●
When you change the brightness of the display, the multi in-
dicator will not appear.
dicator will not appear.
To return to the original brightness:
Press the DIMMER button again.
■
Remote control
15
15
●
When inserting or removing the batteries, push them towards
the
the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the unit to mal-
function.
function.
Precautions for battery use:
●
Insert the batteries according to the direction indicated in the
battery compartment.
battery compartment.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential dam-
age due to battery leakage.
used for long periods of time. This will prevent potential dam-
age due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
the operation becomes erratic.
●
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
and the sensor on the main unit with a soft cloth.
●
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
terfere with operation. Change the lighting or the direction of
the unit.
●
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
shock, and vibrations.
(Main unit operation)
(Main unit operation)
●
2 "AA" size batteries
(U M / SU M -3 , R6 ,
HP-7 or similar)
(U M / SU M -3 , R6 ,
HP-7 or similar)
●
Batteries are not included.
0.2 m - 6 m
(8" - 20’)
(8" - 20’)
CD-PC651H(SUK) TINSE0262AWZZ
7
Click on the first or last page to see other CD-PC651H service manuals if exist.