Read Sharp CD-PC651H User Guide / Operation Manual online
HK
<P=001>
(Continued)
■
Dolby Pro Logic Surround mode
Video and Laser Disc software programmes carrying the
trademark are recordings that contain the same
Dolby Surround data as used in movie theatres.
trademark are recordings that contain the same
Dolby Surround data as used in movie theatres.
The Dolby Pro Logic Surround mode uses Dolby Surround data
to bring the full presence experienced in a movie theatre into
your home.
To use this mode, you must connect the surround and centre
channel speakers.
Before playing a video (or Laser Disc) software programme car-
rying the trademark, be sure to complete the
"Dolby Pro Logic Surround setup" as follows.
to bring the full presence experienced in a movie theatre into
your home.
To use this mode, you must connect the surround and centre
channel speakers.
Before playing a video (or Laser Disc) software programme car-
rying the trademark, be sure to complete the
"Dolby Pro Logic Surround setup" as follows.
Dolby Pro Logic Surround setup:
(Remote control operation)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DOLBY PRO LOGIC button.
●
The NORMAL or PHANTOM button will light.
3
Select the centre mode using the CENTER MODE button.
NORMAL: The centre speaker is used.
PHANTOM: Use this mode when a centre speaker is not
connected. The centre channel signals are
output through the front speakers.
PHANTOM: Use this mode when a centre speaker is not
connected. The centre channel signals are
output through the front speakers.
●
The selected centre mode is automatically stored in memory
and will be used the next time you activate DOLBY PRO
LOGIC or until it is changed.
and will be used the next time you activate DOLBY PRO
LOGIC or until it is changed.
4
Press the TEST TONE button.
●
The test tone is a tone that moves from one speaker to the
next, taking 2 seconds to go from speaker to speaker.
next, taking 2 seconds to go from speaker to speaker.
In NORMAL mode:
Left (L ch)
Centre (C ch)
Right (R ch)
Surround (S ch)
In PHANTOM mode:
Left (L ch)
Right (R ch)
Surround (S ch)
5
Adjust the centre speaker volume or the volume of the sur-
round speakers.
round speakers.
To adjust the centre speaker volume to match the level of
the front speakers:
the front speakers:
Press the CENTER LEVEL
W
button to increase the volume and
the CENTER LEVEL
X
button to decrease the volume.
To adjust the volume of the surround speakers to match
the level of the front speakers:
Press the SURROUND LEVEL
the level of the front speakers:
Press the SURROUND LEVEL
W
button to increase the volume
and the SURROUND LEVEL
X
button to decrease the volume.
6
After adjusting the speaker volume, press the TEST TONE
button.
button.
●
The test tone will stop.
Notes:
●
Be sure to adjust the sound from your favorite listening posi-
tion.
tion.
●
The volume is adjusted in 1 dB steps up or down each time
you press the CENTER LEVEL button or the SURROUND
LEVEL button.
you press the CENTER LEVEL button or the SURROUND
LEVEL button.
●
The volume settings for the centre and surround speakers are
stored in memory for future use. However, if the power is
disconnected or there is a power failure, the levels will return
to their initial settings.
stored in memory for future use. However, if the power is
disconnected or there is a power failure, the levels will return
to their initial settings.
ON/
STAND-BY
TEST
TONE
DOLBY
PRO LOGIC
CENTER
MODE
CENTER
LEVEL
LEVEL
SURROUND
LEVEL
LEVEL
-10 -9 0 +9 +10
Dolby Pro Logic Surround playback:
1
Press the NORMAL or PHANTOM button on the
main unit or the DOLBY PRO LOGIC button on the
remote control.
main unit or the DOLBY PRO LOGIC button on the
remote control.
●
The NORMAL or PHANTOM button will illuminate,
and the unit will enter the Dolby Pro Logic Surround
mode.
and the unit will enter the Dolby Pro Logic Surround
mode.
2
Select the centre mode using the CENTER MODE
button.
button.
NORMAL: The centre speaker is used.
PHANTOM: Use this mode when a centre speaker
is not connected. The centre channel
signals are output through the
front speakers.
PHANTOM: Use this mode when a centre speaker
is not connected. The centre channel
signals are output through the
front speakers.
3
Play the video software programme.
4
To cancel the Dolby Pro Logic Surround mode, press
the BYPASS button on the main unit or the DOLBY
PRO LOGIC button on the remote control.
the BYPASS button on the main unit or the DOLBY
PRO LOGIC button on the remote control.
●
The BYPASS button will light.
Notes:
●
You cannot use the Dolby Pro Logic Surround fea-
ture with headphones.
ture with headphones.
●
If you use headphones, cancel the Dolby Pro Logic
Surround mode.
Even after the headphones are connected, if the unit
is in the Dolby Pro Logic Surround mode, sound will
still be heard from the surround and centre speakers.
Surround mode.
Even after the headphones are connected, if the unit
is in the Dolby Pro Logic Surround mode, sound will
still be heard from the surround and centre speakers.
Front
speaker
(Left)
speaker
(Left)
Centre speaker
Front
speaker
(Right)
speaker
(Right)
Surround
speaker
(Left)
speaker
(Left)
Surround
speaker
(Right)
speaker
(Right)
CD-PC651H(SUK) TINSE0262AWZZ
10
Click on the first or last page to see other CD-PC651H service manuals if exist.