Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
26
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Note:
The PRESET (
The PRESET (
X
or
W
) button on the remote control allows you to recall a memorised
station.
■
Preset memory scan
The stations saved in memory can be scanned automatically.
1
To scan the preset stations, press the PRESET (
X
X
X
X
X
or
W
W
W
W
W
) button
on the remote control for more than 0.5 seconds.
●
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
sequentially, for 5 seconds each.
2
Press the PRESET (
X
X
X
X
X
or
W
W
W
W
W
) button again when the desired sta-
tion is located.
■
To erase all the contents of the preset memory
1. Press the TUNER (BAND) button.
2. Press the ENTER button.
3. Press the CLEAR button.
4. Whilst “ALL CLEAR” is displayed, press the ENTER button.
2. Press the ENTER button.
3. Press the CLEAR button.
4. Whilst “ALL CLEAR” is displayed, press the ENTER button.
To erase only one station:
Recall the memorised station. Whilst it is displayed, press the CLEAR button.
Whilst “CLEAR” is displayed, press the ENTER button.
Recall the memorised station. Whilst it is displayed, press the CLEAR button.
Whilst “CLEAR” is displayed, press the ENTER button.
Listening to the Radio (continued)
■
Preset tuning
You can store 40 AM and FM stations in memory and recall them at the push of a button.
1
Perform steps 1 - 4 in the “Tuning” section on page 25.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, turn the jog dial to select the preset channel
number.
number.
●
Store the stations in memory, in order, starting with preset channel 1.
●
When “ ” is displayed, a station has already been stored in memory.
4
Within 5 seconds, press the ENTER button to store that station
in memory.
in memory.
●
If the “MEMORY” and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
station.
●
When a new station is stored in memory, the station previously memorised
will be erased.
will be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
■
To recall a memorised station
Turn the jog dial to select the desired station.
Radio
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.