Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
21
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
To interrupt playback:
Press the
06
button.
To resume playback from the same point, press the
06
button again.
To stop playback:
Press the
■
button.
To remove a MiniDisc:
Whilst in the stop mode, press the MD
7
button.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
●
If TV or radio interference occurs during MiniDisc operation, move the unit away
from the TV or radio.
●
Although MiniDiscs will not normally skip due to vibration, you may hear skipping in
the sound if there is continuous vibration.
If the volume is turned up too high, sound skipping may occur depending on the
contents of the MiniDisc.
If this happens, turn the volume down and the skipping should stop.
●
If an error message is displayed during MiniDisc operation, see “Error Messages”
on page 55.
Note:
When the monaural-recorded (long-play recorded) MiniDisc is played, “MONO LP” will
be displayed.
When the monaural-recorded (long-play recorded) MiniDisc is played, “MONO LP” will
be displayed.
■
To locate the beginning of a track
To move to the beginning of the next track:
Turn the jog dial slowly clockwise by one position during playback.
Turn the jog dial slowly clockwise by one position during playback.
To restart the track being played:
Turn the jog dial slowly anti-clockwise by one position during playback.
Turn the jog dial slowly anti-clockwise by one position during playback.
Note:
The
The
5
or
4
button on the remote control allows you to locate the beginning of a
track.
■
To locate the desired portion
For audible fast forward:
Press and hold down the
Press and hold down the
2
button during playback.
For audible fast reverse:
Press and hold down the
Press and hold down the
3
button during playback.
Notes:
●
Normal playback will resume when the
3
or
2
button is released.
●
When the end of the last track is reached during fast forward, “DISC END” will
appear in the display and MiniDisc operation will be paused. When the beginning of
the first track is reached during fast reverse and the
appear in the display and MiniDisc operation will be paused. When the beginning of
the first track is reached during fast reverse and the
3
button is released, the unit
will enter the playback mode.
MD Playback
●
You can skip to any track by turning the jog dial until the
desired track number appears.
desired track number appears.
●
You can skip to any track by turning the jog dial until the
desired track number appears.
desired track number appears.
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.