Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
19
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
7
Press the
06
06
06
06
06
button to start playback.
●
Playback will begin from track 1 on the DISC 1.
After that disc finishes playing, the next disc will automatically play.
After that disc finishes playing, the next disc will automatically play.
●
When there is no CD in one of the disc tray 1 - 6 positions, that position will
be skipped and the next CD will be played.
be skipped and the next CD will be played.
●
When the last track on the DISC 6 has finished playing, the CD player will
stop automatically.
stop automatically.
To interrupt playback:
Press the
06
button.
To resume playback from the same point, press the
06
button again.
To stop playback:
Press the
■
button.
To exchange other CDs whilst playing a disc:
Press the CD
7
button for the stopped disc and exchange discs.
To remove the CDs:
Whilst in the stop mode, press the desired CD
7
button.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
●
Do not place two CDs in one disc tray.
●
Do not push the disc tray whilst it is moving.
●
If the power fails whilst the tray is open, wait until the power is restored.
●
If the disc tray is stopped forcibly, “E-CD 20” will appear in the display and the unit
will not function.
If this occurs, press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
will not function.
If this occurs, press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
●
If TV or radio interference occurs during CD operation, move the unit away from the
TV or radio.
TV or radio.
●
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
■
To locate the beginning of a track
To move to the beginning of the next track:
Turn the jog dial slowly clockwise by one position during playback.
Turn the jog dial slowly clockwise by one position during playback.
To restart the track being played:
Turn the jog dial slowly anti-clockwise by one position during playback.
Turn the jog dial slowly anti-clockwise by one position during playback.
Notes:
●
You can locate the beginning of a track on a single disc only.
●
The
5
or
4
button on the remote control allows you to locate the beginning of a
track.
■
To locate the desired portion
For audible fast forward:
Press and hold down the
Press and hold down the
2
button during playback.
For audible fast reverse:
Press and hold down the
Press and hold down the
3
button during playback.
Notes:
●
Normal playback will resume when the
3
or
2
button is released.
●
When the end of the last track is reached during fast forward, “DISC END” will
appear in the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the unit will enter the playback mode.
appear in the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the unit will enter the playback mode.
●
You can locate the desired portion on a single disc only.
CD Playback
●
You can skip to any track by turning the jog dial until the
desired track number appears.
desired track number appears.
●
You can skip to any track by turning the jog dial until the
desired track number appears.
desired track number appears.
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.