Read Sharp CD-ES222E (serv.man5) Service Manual online
– 9 –
CD-ES222H/ES222E
Figure 9-1
How to remove the flywheel (TAPE 1,2)
(See Fig. 9-1)
(See Fig. 9-1)
1. Remove the stop washer (H1) x 1 pc., with a small precision
screwdriver to extract the flywheel from the capstan metal.
Note:
When the stop washer is deformed or damaged, replace it
with a new one.
When the stop washer is deformed or damaged, replace it
with a new one.
How to reinstall the parts
Install each part in the reverse order of the removal with care.
TAPE 1
TAPE 2
Stop
Washer
Washer
Driver
(H1)x1
Stop Washer
Stop Washer
Mechanism
Chassis
Chassis
Washerx2
Flywheel
How to remove the tape mechanism PWB
(TAPE 1,2)(See Fig. 9-2)
(TAPE 1,2)(See Fig. 9-2)
1. Remove the screw (J1) x 1 pc., to remove the tape
mechanism PWB.
2. Remove the screw (J2) x 1 pc.
3. Remove the solder joints (J3) x 2 pcs., to remove the tape
3. Remove the solder joints (J3) x 2 pcs., to remove the tape
mechanism PWB.
Figure 9-2
TAPE 1,2
Tape
Mechanism
PWB
Mechanism
PWB
Tape
Mechanism
PWB
Mechanism
PWB
(J3)x2
Solder
Joint
Solder
Joint
(J2)x1
ø2x8mm
ø2x8mm
(J1)x1
ø2x3mm
ø2x3mm
Click on the first or last page to see other CD-ES222E (serv.man5) service manuals if exist.