CD-ES222E (serv.man5) - Sharp Audio Service Manual (repair manual). Page 6

– 6 –

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

Note 1: How to open the changer manually. (Fig. 6-3)
1. In this state, turn fully the loading Gear in the arrow direction

through the hold on the loading tray bottom.

2. After that,push forward the loading tray.

Side Panel
(Right)

Side Panel
(Left)

Top Cabinet

Front
Panel

(A1)x2
ø3x16mm

(A1)x2
ø3x16mm

(B1)x2
ø3x8mm

(B1)x2
ø3x8mm

(B1)x4
ø3x10mm

(A1)x1
ø3x8mm

Rear Panel

1

1

2

2

(D1)x7
ø3x8mm

(D1)x2
ø3x10mm

(E1)x2
ø3x6mm

CD Player Unit

CD Tray Cover

(E1)x1
ø3x10mm

(C2)x1

(C3)x1

CD Servo
PWB

(C1)x1

Pull

(C2)x1

Pull

Main
PWB

Rear
Panel

CD Player Unit

(Bottom View)

Loading Gear

Front Side

or

Note 2:
1. After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

1

Top Cabinet

1. Screw ...................... (A1) x5

6-1

2

Side Panel

1. Screw ...................... (B1) x8

6-1

(Left/Right)

3

CD Player Unit

1. Turn on the power supply, ..

6-2

    open the disc tray, take out
    the CD tray cover, and close.

..................................  (Note 1)

2. CD Tray Cover ........ (C1) x1
3. Hook ........................ (C2) x2
4. Socket ..................... (C3) x1
5. Socket ..................... (C4) x2

7-1

4

Rear Panel

1. Screw ...................... (D1) x9

6-2

5

Main PWB

1. Screw ...................... (E1) x3

6-2

2. Socket ..................... (E2) x8

7-1

3. Socket ..................... (E3) x2

7-2

6

Front Panel

1. Screw ....................... (F1) x3

7-1

2. Hook ......................... (F2) x2
3. Socket ...................... (F3) x1

7

Display PWB

1. Screw .................... (G1) x13

7-2

8

Tape Mechanism 1. Open the cassette holder.

7-2

2. Screw...................... (H1) x8

9

Headphones PWB 1. Screw ....................... (J1) x1

7-2

10

CD Servo PWB

1. Screw ...................... (K1) x4

7-3

(Note 2)

2. Socket ..................... (K2) x3
3. Flat Cable ............... (K3) x1
4. Solder ...................... (K4) x2

11

Turntable

1. Screw ....................... (L1) x1

7-4

2. Spacer ...................... (L2) x1

12

Loading Tray

1. Push forward the loading tray.

7-4

2. Inserting the flat head into the

hole, push in the direction indi-
cated by the arrow. ... (M1) x2

13

CD Mechanism

1. Hook ........................ (N1) x2

7-5

Block