Read Sharp CD-E110 (serv.man8) Service Manual online
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
ø3x8mm
(A1)x4
ø3x8mm
ø3x8mm
(B1)x3
ø3x8mm
ø3x8mm
Loading
Tray
Tray
(B3)x2
ø2.4x3mm
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
Motor
T/T Up/Down
Motor
Motor
(A3)x2
ø2.4x3mm
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
ø2.6x6mm
CD
Mechanism
Mechanism
Stop Washer
(C1)x1
(C1)x1
Gear
(C2)x1
(C2)x1
Shaft
(C4)x1
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
ø2.6x6mm
Display
