CD-E110 (serv.man8). Removing and reinstalling the main parts - Sharp Audio Service Manual (repair manual)

Model
CD-E110 (serv.man8)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
85.28 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / Removing and reinstalling the main parts
File
cd-e110-sm8.pdf
Date

View Sharp CD-E110 (serv.man8) Service Manual online

CD-E110H
– 8 –
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to
remove the tape mechanism.
Figure 8-1
Figure 8-2
Figure 8-3
Figure 8-4
Figure 8-5
How to remove the record/playback and erase
heads (TAPE 1) (See Fig. 8-1)
1. When you remove the screws  (A1) x 2 pcs., the record/
playback head can be removed.
2. Move the hooks (A2) x 2 pcs., toward the center position as
shown in Fig. 8-1 and then lift the erase head.
How to remove the playback head (TAPE 2)
(See Fig. 8-2)
1. When you remove the screws  (B1) x 2 pcs., the playback
head can be removed.
How to remove the pinch roller (TAPE 1)
(See Fig. 8-3)
1. When you remove the screw  (C1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the pinch roller (TAPE 2)
(See Fig. 8-3)
1. When you remove the screw  (D1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the tape motor (See Fig. 8-4)
1. Remove the belt.
2. Remove the screws (E1) x 6 pcs., to remove the motor
bracket.
3. Remove the screws (E2) x 3 pcs., to remove the tape motor.
How to remove the belt (TAPE 1)
(See Fig. 8-5)
1. Remove the main belt (F1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (F2) x 1 pc.
How to remove the belt (TAPE 2)
(See Fig. 8-5)
1. Remove the main belt (G1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (G2) x 1 pc.
Record/Playback
        Head
Erase
Head
(A1)x1
ø2x3mm
(A1)x1
ø2x7mm
Hook
(A2)x2
TAPE 1
TAPE 2
(B1)x1
ø2x6mm
(B1)x1
ø2x6mm
Playback
Head
Tape
Motor
(E2)x3
Special Screw
Motor
Bracket
(E1)x2
ø2x4mm
(E1)x2
ø2x4mm
(E1)x2
ø2x4mm
Tape
Motor
Motor
Bracket
TAPE 2
Pinch Roller
TAPE 1
Pinch Roller
(C1)x1
ø2x4mm
(D1)x1
ø2x4mm
TAPE 2
TAPE 1
TAPE 2
Main Belt
(G1)x1
TAPE 1
Main Belt
(F1)x1
Tape
Motor
Tape
Motor
REW/FF
Clutch Ass'y
REW/FF
Clutch Ass'y
Main
Belt
(F1)x1
Main
Belt
(G1)x1
REW/FF
Belt
(G2)x1
REW/FF
Belt
(F2)x1
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
– 9 –
CD-E110H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the T/T up/
down motor.
Figure 9-1
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
(B1)x3
ø3x8mm
Loading
Tray
(B3)x2
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
T/T Up/Down
Motor
(A3)x2
ø2.4x3mm
Figure 9-3
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the loading
motor.
(C3)x1
ø2.6x6mm
CD
Mechanism
Stop Washer
(C1)x1
Gear
(C2)x1
Shaft
(C4)x1
Pickup
(C3)x1
ø2.6x6mm

Download Sharp CD-E110 (serv.man8) Service Manual (Repair Manual)

Here you can view online and download Sharp CD-E110 (serv.man8) Service Manual in PDF. CD-E110 (serv.man8) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp CD-E110 (serv.man8) System. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.