Read Sharp CD-DP2400H User Guide / Operation Manual online
29
CD-DP2400H(E)3.fm
01/7/17
CD-DP2400H
Re
fe
re
nces
- T
roub
le
s
h
ooting c
h
a
rt -
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your author-
ised SHARP dealer or service centre.
nician.
If something is wrong with this product, check the following before calling your author-
ised SHARP dealer or service centre.
!
General
!
CD player
!
Tuner
!
Cassette deck
!
Remote control
Symptom
Possible cause
"
The clock is not on time.
"
Did a power failure occur? Reset the
clock. (Refer to page 14.)
clock. (Refer to page 14.)
"
When a button is pressed, the unit
does not respond.
does not respond.
"
Set this unit to the power stand-by mode
and then turn it back on.
and then turn it back on.
"
If the unit still malfunctions, reset it. (Refer
to page 30.)
to page 30.)
"
No sound is heard.
"
Is the volume level set to "0"?
"
Are the headphones connected?
"
Are the speaker wires disconnected?
Symptom
Possible cause
"
Playback does not start.
"
Is the disc loaded upside down?
"
Playback stops in the middle or is
not performed properly.
not performed properly.
"
Does the disc satisfy the standards?
"
Is the disc distorted or scratched?
"
Playback sounds are skipped, or
stopped in the middle of a track.
stopped in the middle of a track.
"
Is the unit located near excessive vibra-
tions?
tions?
"
Is the disc very dirty?
"
Has condensation formed inside the unit?
Symptom
Possible cause
"
Radio makes unusual noise con-
secutively.
secutively.
"
Is the unit placed near the TV or compu-
ter?
ter?
"
Is the FM aerial or AM loop aerial placed
properly? Move the AC power lead away
from the aerial if located near.
properly? Move the AC power lead away
from the aerial if located near.
Symptom
Possible cause
"
Cannot record.
"
Is the erase-prevention tab removed?
"
Cannot record tracks with proper
sound quality.
sound quality.
"
Is it a normal tape? (You cannot record on
a metal or CrO tape.)
a metal or CrO tape.)
"
Cannot erase completely.
"
Sound skipping.
"
Is there any slack?
"
Is the tape stretched?
"
Cannot hear treble.
"
Are the capstans, pinch rollers, or heads
dirty?
dirty?
"
Sound fluctuation.
"
Cannot remove the tape.
"
If a power failure occurs during playback,
the heads remain engaged with the tape.
Do not open the compartment forcibly.
Wait until electricity resumes.
the heads remain engaged with the tape.
Do not open the compartment forcibly.
Wait until electricity resumes.
Symptom
Possible cause
"
The remote control does not oper-
ate.
ate.
"
Is the AC power lead of the unit plugged
in?
in?
"
Is the battery polarity respected?
"
Are the batteries dead?
"
Is the distance or angle incorrect?
"
Does the remote control sensor receive
strong light?
strong light?
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-DP2400H service manuals if exist.