Read Sharp CD-DP2400H User Guide / Operation Manual online
23
CD-DP2400H(E)3.fm
01/7/17
CD-DP2400H
T
a
p
e
Recor
d
in
g
- Rec
o
rd
in
g
t
o
a ca
sse
tt
e
ta
p
e
-
"
Recording from the radio
To interrupt recording:
Press the REC/PAUSE (
) button.
To resume recording, press the / (TAPE 2 ) button.
To stop recording:
Press
the
(TAPE )
button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
"
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press
the
(TAPE )
button.
TAPE 1 and TAPE 2 will simultaneously stop.
"
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Tune in to the desired station. (See page 19.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC/PAUSE (
)
button.
Recording will be paused.
4
Press the / button on the
main unit or the TAPE 2 but-
ton on the remote control to
start recording.
main unit or the TAPE 2 but-
ton on the remote control to
start recording.
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape, make
sure that the erase-prevention tabs are not
removed. Cassettes have removable tabs
that prevent accidental recording or erasing.
sure that the erase-prevention tabs are not
removed. Cassettes have removable tabs
that prevent accidental recording or erasing.
!
To protect the recorded sound, remove the
tab after recording. Cover the tab hole with
adhesive tape to record on the tape without
the tab.
tab after recording. Cover the tab hole with
adhesive tape to record on the tape without
the tab.
Tab of side B
Tab of side A
Side A
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into
the TAPE 1 cassette compart-
ment. Insert a blank tape into the
TAPE 2 cassette compartment.
the TAPE 1 cassette compart-
ment. Insert a blank tape into the
TAPE 2 cassette compartment.
It is recommended that the recording
tape is the same length as the master
tape.
tape is the same length as the master
tape.
3
Press the TAPE (1 2) button un-
til "TAPE 1" appears on the dis-
play.
til "TAPE 1" appears on the dis-
play.
4
Press the REC/PAUSE (
) but-
ton.
Recording will be paused.
5
Press the / button on the
main unit or the TAPE 2 button
on the remote control to start
dubbing.
main unit or the TAPE 2 button
on the remote control to start
dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
be erased facing toward you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
3
Press the REC/PAUSE (
) button.
4
Press the / button on the main unit or the TAPE 2 button on the remote con-
trol to start erasing.
trol to start erasing.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-DP2400H service manuals if exist.