Read Sharp CD-CH1000 User Guide / Operation Manual online
36
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Advanced Features
Enhancing Your Stereo System
The connection lead is not included. Purchase a commercially available lead as shown
below.
below.
Red
White
Red
White
RCA lead
VCR
To the line
output socket
output socket
MiniDisc
Recorder
Recorder
To the OPTICAL/
LINE IN socket
LINE IN socket
Connection cable
for digital recording
for digital recording
■
To listen to signals from VCR, DVD, etc.
1
.
Use a commercially available connection lead to connect the VCR, DVD,
etc. to the AUX IN sockets.
etc. to the AUX IN sockets.
●
When using video equipment, connect the audio output to this unit and the video
output to a television.
output to a television.
2.
Press the ON/STAND-BY button to turn the power on.
3.
Press the AUX button.
4.
Operate the VCR, DVD, etc.
5.
Adjust the input level from VCR, DVD, etc. using the
3
or
2
button.
●
The “OVER” indicator should not light at the maximum level.
–2
+4
0
6.
To record the sound from VCR, DVD, etc., perform steps 2 - 4 of the
“Recording from the radio” section on page 32.
“Recording from the radio” section on page 32.
Note:
To prevent hum interference, place this unit away from a television.
To prevent hum interference, place this unit away from a television.
■
To record CD signals on MDs (digital output)
The digital signal from this unit can be recorded by MiniDisc recorders, etc.
1
.
Remove the DIGITAL OUT socket cover.
2.
Use a connection cable for digital recording to connect the unit to the
OPTICAL/LINE IN socket of a MiniDisc recorder, etc.
OPTICAL/LINE IN socket of a MiniDisc recorder, etc.
3.
Put the MD, etc. in the recording mode.
4.
Play a CD on this unit.
Note:
Only CD signals can be output.
Only CD signals can be output.
■
Headphones
●
Before plugging in or unplugging the headphones, reduce the volume.
●
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
●
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
volume using the VOLUME buttons.
OVER
Click on the first or last page to see other CD-CH1000 service manuals if exist.