Read Sharp CD-CH1000 User Guide / Operation Manual online
34
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Advanced Features
6
Turn the jog dial to specify the minute and within 10 seconds,
press the ENTER button.
press the ENTER button.
7
Turn the jog dial to specify the hour to stop and within 10
seconds, press the ENTER button.
seconds, press the ENTER button.
8
Turn the jog dial to specify the minute and within 10 seconds,
press the ENTER button.
press the ENTER button.
9
Adjust the volume using the VOLUME buttons.
●
Do not turn the volume up too high.
10
Press the CD, TUNER (BAND) or TAPE button to select the de-
sired function.
sired function.
To select the timer playback source : CD, TUNER (BAND) or TAPE.
To select the timer recording source : TUNER (BAND).
To select the timer recording source : TUNER (BAND).
Timer and Sleep Operation (continued)
11
Press the ON/STAND-BY button to enter the timer stand-by mode.
To cancel the timer playback/timer recording:
1. Press the ON/STAND-BY button to turn the power on.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER OFF” and then press the ENTER button.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER OFF” and then press the ENTER button.
To check the setting time:
1. Press the ON/STAND-BY button to turn the power on.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER PLAY” or “TIMER REC” and then press
2. Press the MENU button.
3. Turn the jog dial to select “TIMER PLAY” or “TIMER REC” and then press
the ENTER button.
4. Press the ON/STAND-BY button to enter the timer stand-by mode.
12
When the preset time is reached, playback or recording will start.
●
The volume will increase gradually until it reaches the volume you were lis-
tening to before turning off your system.
tening to before turning off your system.
13
When the timer end time is reached, the system will enter the
power stand-by mode automatically.
power stand-by mode automatically.
●
If you press any button during timer operation, the timer mode will be can-
celled and playback or recording will last even when the end time is reached.
celled and playback or recording will last even when the end time is reached.
Note:
When performing timer playback or recording using another unit connected to the AUX
IN sockets, select “AUX” in step 10. At this time, only this stereo system will be turned
off automatically. (Another unit will not be turned off.)
When performing timer playback or recording using another unit connected to the AUX
IN sockets, select “AUX” in step 10. At this time, only this stereo system will be turned
off automatically. (Another unit will not be turned off.)
To change the setting time:
Perform “Timer playback/Timer recording” from the beginning.
Start time
End time
Click on the first or last page to see other CD-CH1000 service manuals if exist.