Read Sharp CD-CH1000 (serv.man2) User Guide / Operation Manual online
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to the Radio
■
If trouble occurs (reset)
When this product is subjected to strong external interference (mechani-
cal shock, excessive static electricity, abnormal supply voltage due to light-
ning, etc.) or if it is operated incorrectly, it may malfunction.
cal shock, excessive static electricity, abnormal supply voltage due to light-
ning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the VOLUME
2. Whilst pressing down the VOLUME
X
button, press the ON/STAND-
BY button until “ALL CLEAR” appears.
■
Maintenance
●
Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
jams. Clean these parts with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
When cleaning the heads, pinch roller, etc., unplug the unit which con-
tains high voltages.
tains high voltages.
●
●
Clean the dust or stain on the CD pickup lens using a commercial clean-
ing disc (brush type).
ing disc (brush type).
A Erase head
C Capstan
B Recording/Playback head
D Pinch roller
A
B
C
D
Cleaning disc
A0007.TO
TINSE0321AWZZ
1
Press the TUNER (BAND) button to se-
lect the desired frequency band (FM or
AM).
lect the desired frequency band (FM or
AM).
2
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to
tune into the desired station.
●
When the TUNING button is pressed for more
than 0.5 seconds, scanning will start automati-
cally and the tuner will stop at the first receiv-
able broadcast station.
than 0.5 seconds, scanning will start automati-
cally and the tuner will stop at the first receiv-
able broadcast station.
3
To receive an FM stereo transmission,
press the ST-MODE button on the re-
mote control. The “ST” indicator lights
up.
press the ST-MODE button on the re-
mote control. The “ST” indicator lights
up.
●
“
j
” will appear when an FM broadcast is in
stereo.
ST
