Read Sharp CD-C661H (serv.man2) Service Manual online
– 9 –
CD-C661H/HR
CP-C661H (CD-C661H ONLY)
1
Front Panel
1. Net .......................... (A1) x1
9-1
2. Rubber ................... (A2) x4
3. Screw ..................... (A3) x4
4. Tip .......................... (A4) x4
3. Screw ..................... (A3) x4
4. Tip .......................... (A4) x4
9-2
2
Woofer
1. Screw ..................... (B1) x4
9-2
3
Tweeter
1. Screw ..................... (C1) x4
9-2
4
Super Tweeter
1. Screw ..................... (D1) x2
9-2
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 9-1
Figure 9-2
How to remove the pickup (See Fig. 9-4)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2).
2. Remove the stop washer (B3) x 1 pc., to remove the gear
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4).
3. Remove the pickup.
Figure 9-4
REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13, 14 and 15 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 9-3)
(See Fig. 9-3)
1. Remove the screws (A1) x 2 pcs., to remove the loading
motor.
Figure 9-3
Note
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector to protect the optical pickup from
electrostatic damage.
(A1) x2
ø2.6 x5mm
ø2.6 x5mm
Loading Motor
Motor
PWB
PWB
(B1) x2
ø2.6 x6mm
ø2.6 x6mm
Shaft
(B2) x1
(B2) x1
Stop Washer
(B3) x1
(B3) x1
Gear
(B4) x1
(B4) x1
CD Mechanism
Pickup
(A1)x1
Front Panel
(A3)x4
ø4x18mm
ø4x18mm
(A2)x4
Front Panel
Tweeter
Super
Tweeter
Tweeter
(C1)x4
ø3x10mm
ø3x10mm
(D1)x2
ø3x10mm
ø3x10mm
Woofer
(B1)x4
ø4x12mm
ø4x12mm
(A4)x4
CP-C661H (CD-C661H ONLY)
Click on the first or last page to see other CD-C661H (serv.man2) service manuals if exist.