CD-C607H (serv.man5) - Sharp Audio Service Manual (repair manual). Page 7

– 7 –

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

1

Top Cabinet

1. Screw ..................... (A1) x4

7-1

2

Side Panel

1. Screw ..................... (B1) x6

7-1

(Left/Right)

2. Hook ....................... (B2) x2

3

CD Play Unit/

1. Turn on the power supply,         7-2

CD Player Unit

    open the disc tray, take out
    the CD tray cover, and close.
    (Note 1)
2. Hook ...................... (C1) x5
3. Socket ................... (C2) x2

4

Back Board

1. Screw .................... (D1) x5

7-2

5

Main PWB

1. Screw ..................... (E1) x3

8-1

2. Socket .................... (E2) x5
3. Flat wire .................. (E3) x3

6

Tuner PWB

1. Screw ..................... (F1) x2

8-1

7

Front Panel

1. Screw .................... (G1) x2

8-1

8

Headphones

1. Screw .................... (H1) x1

8-2

PWB

2. Guide ...................... (H2) x1

9

Display PWB/

1. Screw ..................... (J1) x8

8-2

Switch PWB

2. Hook ....................... (J2) x7

3. Socket .................... (J3) x1

10

Tape Mechanism 1. Open the cassette holder          8-2

2. Screw ..................... (K1) x6

11

Turntable

1. Screw ..................... (L1) x1

8-3

2. Guide ...................... (L2) x1

12

Disc Tray

1. Screw .................... (M1) x2

8-3

2. Guide ..................... (M2) x2

13

CD Servo PWB

1. Screw .................... (N1) x1

8-4

(Note 2)

2. Socket ................... (N2) x4

14

CD Changer

1. Screw ..................... (P1) x4

8-5

Mechanism

15

CD Mechanism

1. Screw ..................... (Q1) x1

8-5

Top Cabinet

Front Panel

(A1)x2
ø3 x12mm

(A1)x2
ø3x12mm

(B2)x1

(B2)x1

Side Panel
(Left)

Side Panel
(Right)

(B1)x1
ø3x10mm

(B1)x1
ø3x10mm

(B1)x4
ø3x12mm

Back Board

Back Board

CD Tray Cover

CD Player
Unit

(C1) x3

(D1) x5
ø3x8mm

(C1) x1

(C2) x2

1

1

2

Pull

(C1) x1

CD Servo
PWB

Disc Tray

Front Panel

LOCK 
     LEVER

Note 1:
How to open the change manually.
1. Then, turn fully the lock lever in the arrow direction through

the hole on the loading chassis bottom in this state.
After that, push forward the CD player base. (Fig. 7-3)

Note 2:
1. After disconnecting the optical pickup connector, wrap the

front end of connector in conductive aluminum foil  to
prevent damage to the optical pickup by static electricity.