Read Sharp R-1900M (serv.man13) User Guide / Operation Manual online
<Single Stage Cooking>
E.g. 3 mins at 100% power.
E.g. 3 mins at 100% power.
E.g. 3 mins 30 secs at 60% power.
*The POWER LEVEL pad does not need to be pressed to select 100% power.
**Refer to Microwave Power Level in Operation Manual page EN-10.
<Multi-Stage Cooking>
E.g. 1 min at 100% power, 2 mins at 70% power, 2 mins 30 secs at 100% power.
*The POWER LEVEL pad does not need to be pressed to select 100% power at last stage.
**Refer to Microwave Power Level in Operation Manual page EN-10.
***Maximum 4 stages can be programmed.
****If the cooking time is exceeded, error message, EE9 will be displayed.
To clear it press the STOP/CLEAR pad and reduce the Total Cooking Time, power level.
<Express Defrost> Refer to the Express Defrost Chart in the Operation Manual page EN-11.
E.g. Defrost for 3 mins and 30 secs.
TOUCH GUIDE
<<
FOR MORE COMPLETE INFORMATION AND SAFETY PRECAUTIONS, REFER TO YOUR OPERATION MANUAL
>>
CUSTOM SETTING (11 operations to customize your oven, Factory settings are in bold.)
MANUAL COOKING
MEMORY COOKING
(Auto Start OFF) (Auto Start ON)
<Dual Digit Input>
E.g. Cook with Memory 2
<Single Digit Input>
E.g. Cook with Memory 2
<Repeat Digit Input>
E.g. Cook with Memory 12
<Cooking double/triple quantity with Memory>
E.g. Cook 2 servings with memory 2 (Repeat Digit input.)
E.g. Cook 3 servings with memory 2 (Single Digit input.)
<Express Defrost with Memory>
E.g. Cook with memory 0 (Dual Digit Input.)
E.g. Cook with Memory 12
<Cooking double/triple quantity with Memory>
E.g. Cook 2 servings with memory 2 (Repeat Digit input.)
E.g. Cook 3 servings with memory 2 (Single Digit input.)
<Express Defrost with Memory>
E.g. Cook with memory 0 (Dual Digit Input.)
1. Selecting Memory Input Method
Dual Digit Input Single Digit Input Repeat Digit Input
2. Selecting Auto Start Operation
Auto Start OFF Auto Start ON
3. Program Lock Setting
Lock OFF Lock ON
4. Audible Signal Sound Volume Setting
High Medium
Mute
5. Cooking completion Signal Setting
1 long beep Repeat long beeps 4 short beeps Repeat short beeps
6. Memory Check: Use this function to check the programming for a certain memory.
e.g. Memory 7 (Dual Digit Input.)
7. Counter Check/Clear: Shows how many times each pad has been used, or reset the count to 0.
Total Usage Memory (e.g.#6) Manual Cooking Express Defrost Reset
*Regardless of Input Method selected, use Dual Digit Input Method to input memory number.
8. Air Intake Filter Counter: Shows how many hours the filter has been used, reset the count to 0, or change cleaning cycle.
8. Air Intake Filter Counter: Shows how many hours the filter has been used, reset the count to 0, or change cleaning cycle.
Check
Total count Reset count
*Factory setting for Cleaning cycle is 100 hours and can be changed to 1- 999 hours.
9. Selecting Operation in case of Magnetron Failure
Stop operation Allow operation of single magnetron
9. Selecting Operation in case of Magnetron Failure
Stop operation Allow operation of single magnetron
10. Multiplication Factors for Double/Triple Quantity
Check multiplication
Set multiplication
(e.g. double quantity memory 6) (e.g. double quantity, memory 6 to 2.00)
*
Regardless of Input Method selected, use the Dual Digit Input Method to input memory number.
** Press the x2/x3 pad once for 2 servings, twice for 3 servings to check or set multiplication.
***Factory settings are 1.80 for Double Qty. and 2.60 for Triple Qty.
11. Express Defrost Setting
***Factory settings are 1.80 for Double Qty. and 2.60 for Triple Qty.
11. Express Defrost Setting
Press CUSTOM SETTING pad twice within 2 seconds, and press number pads or desired pad to select options. Press the
STOP/CLEAR pad to exit from the Custom Setting.
*You will hear an audible signal the second time the CUSTOM SETTING pad is pressed to indicate that you have entered
Custom Setting.
STOP/CLEAR pad to exit from the Custom Setting.
*You will hear an audible signal the second time the CUSTOM SETTING pad is pressed to indicate that you have entered
Custom Setting.
+
or
2
1
1
1
3
1
+
1
3
2
3
+
or
+
1
4
2
4
+
or
3
4
+
1
2
2
2
+
or
+
1
5
2
5
+
or
3
5
6
7
0
+ +
+
1
9
2
9
+
or
+
4
5
+
7
6
0
+ +
or
or
+
or
or or
2
8
2
8
or
+
5
1
0
or
or
Check
Cleaning cycle Change cleaning cycle (e.g. 150 hours)
or
+
+
6
0
x2/x3
0
2
6
0
x2/x3
0
2
5
→
→
Pause Timing PL3
A1 B1 PL1 A2 B2 PL2
2
3
1
3
3
0
2
4
*Factory settings are A1=0.2 B1=20sec. PL1=40%, A2=0.13 B2=30sec. PL2=30%, Pause Timing=50% PL3=20%.
+
Midway through the defrosting cycle, the CHECK indicator will light in the display and an audible
signal will be heard unless signal volume has been set to Mute. You may open the door, turn food
over and shield any warm portions. Close the door and press the START pad to continue defrosting.
signal will be heard unless signal volume has been set to Mute. You may open the door, turn food
over and shield any warm portions. Close the door and press the START pad to continue defrosting.
3
3
0
1
8
1
8
or
+
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
CUSTOM
SETTING
SETTING
MANUAL
REPEAT
POWER
LEVEL
MANUAL
REPEAT
MANUAL
REPEAT
POWER
LEVEL
MANUAL
REPEAT
MANUAL
REPEAT
POWER
LEVEL
MANUAL
REPEAT
MANUAL
REPEAT
MANUAL
REPEAT
0
3
0
MANUAL
REPEAT
3
3
0
6
POWER
LEVEL
MANUAL
REPEAT
0
1
0
0
2
0
7
3
2
0
POWER
LEVEL
MANUAL
REPEAT
MANUAL
REPEAT
POWER
LEVEL
POWER
LEVEL
MANUAL
REPEAT
<Saving Time and Power level>
Press the SET MEMORY pad twice within 2 seconds.
Refer to HELPFUL TIPS 2 to enter memory numbers.
E.g. Set 1 minute at 70% power with memory 12 (Dual Digit Input.)
*When memory is set in succession, repeat step ② to step ⑤ and the last step ⑥. Refer to Dual Digit Input in Operation Manual page EN-19.
**Refer to <Single Stage Cooking> * and <Multi-Stage cooking> *~ **** in MANUAL COOKING.
<Saving Express Defrost>
E.g. Set 30 minutes with memory 2.
Press the SET MEMORY pad twice within 2 seconds.
Refer to HELPFUL TIPS 2 to enter memory numbers.
E.g. Set 1 minute at 70% power with memory 12 (Dual Digit Input.)
*When memory is set in succession, repeat step ② to step ⑤ and the last step ⑥. Refer to Dual Digit Input in Operation Manual page EN-19.
**Refer to <Single Stage Cooking> * and <Multi-Stage cooking> *~ **** in MANUAL COOKING.
<Saving Express Defrost>
E.g. Set 30 minutes with memory 2.
SAVING MEMORY
3 0 0 0
2
1 2
1 0 0
7
step ① step ② step ③ step ④ step ⑤ step ⑥
MANUAL
REPEAT
POWER
LEVEL
Check sequence: The Express Defrost setting of each phase is shown until being pressed the MANUAL/REPEAT pad.
(STAGE1→ A1→ B1→ PL1→ STAGE2 → A2 → B2 → PL2 → STAGE 3 →Pause Timing
→ PL3 is displayed.)
Set sequence (A1=0.20 B1=20sec. PL1=40%, A2=0.13 B2=30sec. PL2=30%, Pause Timing=50%, PL3=20%)
Re-cook in the previous manual cooking setting.
E.g. 1 minute at 70% power for 1st stage and then continue to cook for 2 minutes at 50% power for 2nd stage.
REPEAT COOKING
MANUAL
REPEAT
Printed in Thailand
TCADRA031WRRZ-K81
TCADRA031WRRZ-K81
HEPLFUL TIP 1
When Auto Start ON has been selected,
1. “0” should be displayed before entering memory number.
When “0” is not displayed, open the door and close to reset.
2. The START pad does not need to be pressed.
Cooking will automatically start when the memory number is input.
HELPFUL TIPS 2
The Memory Input Method determines how to input memory numbers for Memory Cooking, Custom Setting and Saving Memories.
Follow the notes below, and refer to HELPFUL TIPS and Memory cooking sections for details.
1. Dual Digit Input: Must input two numbers to select a memory, even though the first number is 0. Memory programming is limited to 0-99 to
select a memory.
2. Single Digit Input: Can only input one number to select a memory.
Memory programming is limited to 0-9 to select a memory.
3. Repeat Digit Input: Input one, two, or three numbers to select a memory.
Memory programming is limited to 0-29 to select a memory.
4. Only when Repeat Digit Input/Auto Start ON, push number pads within
one second of the previous number.
5. Regardless of input Method selected, Counter Check/Clear (Custom Setting 7) and Multiplication Factor for Double/Triple Quantity
(Custom Setting 10) use Dual Digit Input Method to input memory number.
When Auto Start ON has been selected,
1. “0” should be displayed before entering memory number.
When “0” is not displayed, open the door and close to reset.
2. The START pad does not need to be pressed.
Cooking will automatically start when the memory number is input.
HELPFUL TIPS 2
The Memory Input Method determines how to input memory numbers for Memory Cooking, Custom Setting and Saving Memories.
Follow the notes below, and refer to HELPFUL TIPS and Memory cooking sections for details.
1. Dual Digit Input: Must input two numbers to select a memory, even though the first number is 0. Memory programming is limited to 0-99 to
select a memory.
2. Single Digit Input: Can only input one number to select a memory.
Memory programming is limited to 0-9 to select a memory.
3. Repeat Digit Input: Input one, two, or three numbers to select a memory.
Memory programming is limited to 0-29 to select a memory.
4. Only when Repeat Digit Input/Auto Start ON, push number pads within
one second of the previous number.
5. Regardless of input Method selected, Counter Check/Clear (Custom Setting 7) and Multiplication Factor for Double/Triple Quantity
(Custom Setting 10) use Dual Digit Input Method to input memory number.
The Memory Input Method
Memory
Input Method
Input Method
Dual Digital Input
Single Digital Input
Repeat Digital Input
Single Digital Input
Repeat Digital Input
Memory No
Examples
Examples
0
2
12
22
0, 0
0, 2
1, 2
2, 2
0
2
0
2
2, 2
2, 2, 2
CONTROL PANEL
5. STOP/CLEAR pad
Press to stop oven operation, clear programming or exit from
Custom Setting Function.
6. START pad
Press to start oven or set programs.
7. Ten number pads
Press to enter times or memory numbers.
8. EXPRESS DEFROST pad
Press to use Express Defrost function.
9. SET MEMORY pad
Press to set memory programming.
Press to stop oven operation, clear programming or exit from
Custom Setting Function.
6. START pad
Press to start oven or set programs.
7. Ten number pads
Press to enter times or memory numbers.
8. EXPRESS DEFROST pad
Press to use Express Defrost function.
9. SET MEMORY pad
Press to set memory programming.
1. MANUAL/REPEAT pad
Press to enter cooking times, re-cook in the previous manual
cooking setting, change Express Defrost Factors, change
Multiplication Factors for double/triple quantity, change the
Air Intake Filter cleaning cycle, check Total manual cooking
usage, or move to next stage.
2. POWER LEVEL pad
Press to enter power level.
3. DOUBLE/TRIPLE QUANTITY pad
Press to cook double/triple quantities in Memory Cooking or
check/change the Multiplication Factor for each memory.
4. CUSTOM SETTING pad
Press to check/change settings or counters.
Press to enter cooking times, re-cook in the previous manual
cooking setting, change Express Defrost Factors, change
Multiplication Factors for double/triple quantity, change the
Air Intake Filter cleaning cycle, check Total manual cooking
usage, or move to next stage.
2. POWER LEVEL pad
Press to enter power level.
3. DOUBLE/TRIPLE QUANTITY pad
Press to cook double/triple quantities in Memory Cooking or
check/change the Multiplication Factor for each memory.
4. CUSTOM SETTING pad
Press to check/change settings or counters.
1
2
3
4
5
6
7
8
9
5
6
Display