Read Sharp CD-BA250 (serv.man2) User Guide / Operation Manual online
– 4 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
■
If trouble occurs
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the follow-
ing:
¡
Press the ON/STAND-BY button to enter the power
stand-by mode.
stand-by mode.
™
Whilst pressing down the
0 /
R
button and the X-BASS/
DEMO button, press the ON/STAND-BY button until
“CLEAR AL” appears.
“CLEAR AL” appears.
■
Maintenance
●
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
unit which contains high voltages.
●
●
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
mercial cleaning disc (brush type).
1
Open the cassette door by pushing the
area marked “
area marked “
7
7
7
7
7
PUSH EJECT”.
2
Load a cassette into the TAPE 1 or TAPE
2 cassette compartment with the side to
be played facing toward you.
2 cassette compartment with the side to
be played facing toward you.
3
Press the TAPE (1
V
V
V
V
V
2) button to select
the cassette you want to listen to.
4
Press the
0 / R
0 / R
0 / R
0 / R
0 / R
button to start playback.
TAPE 1
TAPE 2
Listening to a cassette tape (TAPE 1 or TAPE 2)
TAPE 1
TAPE 2
A
C
C
D
E
B
B
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
*CDBA250E_QG
01.2.8, 6:20 PM
4
