AE-XM24CR (serv.man8). Functions - Sharp Air Conditioner Service Manual (repair manual). Page 6

36

 ".

• The red OPERATION lamp ( 

The red OPERATION lamp ( 

Press the SELF CLEAN button when the unit is not
operating.

  ) and the blue

PLASMACLUSTER lamp on the unit will light up.

• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated on the

TEMPERATURE INDICATOR of the indoor unit in
minute decrements.

Press the SELF CLEAN button.
Or, turn the unit off by pressing the ON/OFF button.

• The red OPERATION lamp ( 

  ),the blue

PLASMACLUSTER lamp and the TEMPERATURE
INDICATOR on the unit will turn off.

When the unit is in operation, press the
PLASMACLUSTER button to select the mode.

PLASMACLUSTER AUTO

AIR CLEAN

REFRESHING

CANCEL

• In the AIR CLEAN operation, the blue

PLASMACLUSTER lamp on the unit will light up.

• In the REFRESHING operation, the green

PLASMACLUSTER lamp on the unit will light up.

Press the PLASMACLUSTER button until
PLASMACLUSTER symbol on the remote control
display goes off.

• The PLASMACLUSTER lamp on the unit will turn off.

:

• You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF

CLEAN operation.

SWING

CLEAN

FAN

SET/C

AM

• Setting of the PLASMACLUSTER operation will be memorized and will operate in the same

mode, the next time you turn on the air conditioner.

• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
• When the PLASMACLUSTER button is pressed while the unit is not operating, the

PLASMACLUSTER operation will be performed without accompanying air conditioning mode
(eg. HEATING or COOLING).The mode symbol of the remote control will go off and the fan
speed can not be set AUTO. At this time, you may feel HEATING is performed with units in other
rooms. Indoor fan will decrease its rotating speed and will ture ON and OFF depending on the
room temperature.

SWING

CLEAN

FAN

MODE

SET/C

1h

AM

AUTO