Read Panasonic TX-29PS1D / TX-29PS1F / TX-29PS1P / TX-29PS1B Service Manual online
ADJUSTMENT PROCEDURE
Item / Preparation
Adjustments
+B SET-UP
1. Receive a Greyscale signal.
2. Set the controls :
2. Set the controls :
Brightness
Minimum
Contrast
Minimum
Volume
Minimum
Confirm the following voltages.
TPD1
220
± 10V
TPD11
3,3 ± 0,2V
TPD2
137
± 1,5V
TPD12
5
± 0,25V
TPD3
26,5
± 1,5V
TPD13
31
± 1,5V
TPD4
5
± 0,25V
TPD14
26 ± 1V
TPD5
38
± 1,5V
TPD15
-13,5 ± 1V
TPD6
6,4
± 0,5V
TPD16
13,5
± 1V
TPD7
13,6
± 0,5V
TPG1
2,5
± 0,2V
TPD9
8
± 0,5V
TPG2
3,3
± 0,2V
TPD10
12
± 0,5V
CUT OFF / Ug2 Test
1. Receive a Greyscale signal.
2. Degauss the tube externally.
3. Set the TV into Service Mode 1.
4. Select Cut off mode.
2. Degauss the tube externally.
3. Set the TV into Service Mode 1.
4. Select Cut off mode.
To adjust Cutoff connect an oscilloscope to the Blue cathode. Adjust
“cutoff” value using the “Yellow” and “Blue” buttons until the black
level is 160V +5V/-0V press “TV/AV” to store the value.
Remove the oscilloscope.
Select Ug2 adjustment and adjust the screen VR until the display
shows “O.K.”
“cutoff” value using the “Yellow” and “Blue” buttons until the black
level is 160V +5V/-0V press “TV/AV” to store the value.
Remove the oscilloscope.
Select Ug2 adjustment and adjust the screen VR until the display
shows “O.K.”
SELF CHECK
Self-check is used to automatically check the bus lines and hexadecimal code of the TV set.To enter Self-Check mode, press
the STATUS button on the remote control and at the same time press the down (-/v) button on the customer controls at
the front the TV set. To exit Self Check, switch off the TV set at the power button.
the STATUS button on the remote control and at the same time press the down (-/v) button on the customer controls at
the front the TV set. To exit Self Check, switch off the TV set at the power button.
If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".
Service Aids
To aid in the service of our current chassis there are a number of Service Aids which have been made available.
·
·
LUCI
interface kit (Linked Utility Computer Interface)
Part number: TZS6EZ002
This contains interface and cables for connecting TV service connector and a PC as well as diagnostic software. As new
models are introduced upgrade software will become available.
This contains interface and cables for connecting TV service connector and a PC as well as diagnostic software. As new
models are introduced upgrade software will become available.
·
VICI
(Visual Interactive Computer Information)
These C.D.'s contain multimedia documentation providing quick access to service information.
Part No. TZS7EZ006, TZS7EZ005, TZS8EZ001 & TZS9EZ001
1. Service Manuals
2. Instruction Books
3. Technical Information
Part No. TZS7EZ006, TZS7EZ005, TZS8EZ001 & TZS9EZ001
1. Service Manuals
2. Instruction Books
3. Technical Information
·
TASMIN
(Technically Advanced System for Multimedia Interactive Notes)
As well as providing a first step towards more interactive training this product also achieves quick access to Technical
Information.
Information.
5
VDP
O.K.
TUN
O.K.
E2
O.K.
MSP
O.K.
Avs
O.K.
DPL
- - -
MAS
- - -
PCB
O.K.
CAB
O.K.
SUM
****
OPTION 1
B9
B9
B9
OPTION 2
3C
3C
3C
OPTION 3
0F
0F
0F
OPTION 4
40
48
40
OPTION 5
FF
FD
FD
OPTION 6
E1
E1
E1
TX-29PS1D
TX-29PS1F
TX-29PS1P
TX-29PS1P/B
Click on the first or last page to see other TX-29PS1D / TX-29PS1F / TX-29PS1P / TX-29PS1B service manuals if exist.