TX-29PS10D, TX-29PS10F, TX-29PS10P, TX-29PS10B - Panasonic TV Service Manual (repair manual). Page 6

(The figures below are nominal and used for representative purposes only.)
1.  Set the Bass to maximum position, set the Treble to minimum position, set the Volume to minimum then press  the

down button (-/v) on the customer controls at the front of the TV and at the same time press the INDEX button on the
remote control, this will place the TV into the Service Mode 1.

2.  Press the RED / GREEN buttons to step up / down through the functions.
3.  Press the YELLOW / BLUE buttons to alter the function values.
4.  Press the STR button after each adjustment has been made to store the required values.
5.  To exit the Service Mode, press the "N" button.

Note: All setting values are approximate

Horizontal Position

H-Pos

31

Optimum setting.

Vertical Position

V-Pos

 -44

Optimum setting.

Horizontal Amplitude

H-Amp

 -4

Optimum setting.

Vert. Amplitude

V-Amp

–11

Optimum setting.

EW-amplitude

EW-Amp 1

 - 35

Optimum setting.

Lower Corner

Lower Corner

4

Optimum setting.

Trapezium-comp

Trapez 1

 -4

Optimum setting.

Upper Corner

Upper Corner

1

Optimum setting.

Vertical Symmetry

V-Sym

 -13

Optimum setting.

Vertical Linearity

V-Lin

 34

Optimum setting.

Angle

Angle

0

Optimum setting.

Bow

Bow

1

Optimum setting.

DVCO

DVCO

-1

Receive a PAL Colour Bar Pattern. For
DVCO alignment press "Blue" button, wait
until the colours are changing slowly and
press "STR".

Highlight

Lowlight

High 0373 0343 0350
Low

0161 0154 0160

Optimum setting.

Sub-Brightness

Sub-Brightness

-13

Optimum setting.