Read Panasonic TX-25P80T Service Manual online
5.6. PAL COLOUR OUTPUT
Item/Preparation
Adjustment Procedure
1.
Receive PAL colour bar pattern.
2.
Connect an oscilloscope probe to TPA40.
3.
Connect a short jumper to FBT pin 3 or TPA34 and TPA32.
4.
Set control :
Picture menu.....................DYNA MIC NORMAL
AI................ .................... ..off (for model with AI only)
AI................ .................... ..off (for model with AI only)
1.
Adjust Bright Control.
a = 2.3±-0.2Vp-p
2.
Adjust Sub Colour control.
3.
Connect the osciloscope probe to TPA40.
4.
Connect the waveform.
b = 3.1±-0.5Vp-p
5.7. NTSC COLOUR OUTPUT
Item/Preparation
Adjustment Procedure
1.
Apply 3.58MHz NTSC Rainbow pattern.
2.
Connect an oscilloscope to TPA40.
3.
Connect a short jumper to FBT pin 3 or TPA34 and TPA32.
4.
Set control :
Picture menu.......................DYN AMIC CONTROL
Channel Colour Set...........ST D
1.
Adjust Bright Control.
a = 2.3±-0.2Vp-p
2.
Connect the waveform.
b = 1.3±-0.5Vp-p
9
TX-25P80T
Click on the first or last page to see other TX-25P80T service manuals if exist.